Soundmax SM-CCR3037 - Инструкция по эксплуатации - Страница 17

17

Radio operations

Band selection

Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, MW1 (AM1),

MW2 (AM2). Each band can store 6 preset stations, for a total of 30 preset memory stations.

Tuning

Press and hold PREVIOUS or NEXT button; the unit will automatically search a nearest station with a strongl

signal. To search next station, repeat this procedure. To stop the automatical search, press PREVIOUS or

NEXT button. Press PREVIOUS/NEXT buttons to search for a station manually step by step.

Automatic store/Scan

Automatic store: Press and hold AMS button, the receiver will automatically scan and save stations for the

current band.

Scan: Press AMS button once to scan the saved stations in each band.

Programming stations

There are 6 numbered preset buttons, under which you can store and recall stations for each band. Select the

needed station, then press and hold a preset button. The station will be saved in the memory under the

corresponding number. To recall a stored station, press the corresponding preset button.

Mono/Stereo control (in FM radio mode)

Press and hold SEL button; then press it repeatedly until the display shows STEREO (MONO). Press VOL+/VOL-

buttons on the RC or rotate VOL regulator on the panel to select between STEREO/MONO. STEREO means

stereo reception of the signal; MONO means mono reception mode. Improvement of reception of distant

stations can be done by selecting mono mode, which may cut down some reception noise.

Local radio station

Press  and  hold  SEL  button;  then  press  it  repeatedly  until  the  display  shows  LOCAL  (DX).  Press  VOL+/VOL-

buttons on the RC or rotate VOL regulator on the panel to select between LOCAL/DX. LOCAL means that only

local  stations  are  received;  DX  means  that  both  local  and  distant  stations  with  weak  and  strong  signal  are

received.