Pioneer KEH-P7910R - Инструкция по эксплуатации - Страница 42

41

Audio Adjustment

Subwoofer Setting Adjustment (Sub-W2)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.

Note:

• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the

Subwoofer ON/OFF mode.

Non Fading Output (NonFad)

When the Non Fading Output setting is ON, the audio signal does not pass through this
unit’s low pass filter (for the Subwoofer), but is output through the RCA output.

Note:

•  When the Subwoofer Controller setting is only “S.W Control:EXT”, you can switch the Non

Fading Output ON/OFF mode. (Refer to page 49.)

2. Switch the Non Fading output

ON/OFF with the 

5

/

∞

buttons.

1. Press the AUDIO button and select the Non Fading Output ON/OFF

mode (NonFad) in the Audio Menu.

3. Increase or decrease the output

level with the 

5

/

∞

buttons.

The display shows “+ 6” – “– 6”.

2. Select the frequency to 50 Hz,

80 Hz or 125 Hz with the 

2

/

3

buttons.

1. Press the AUDIO button and select the Subwoofer setting mode 

(Sub-W2) in the Audio Menu.