Pioneer KEH-P6011R - Инструкция по эксплуатации - Страница 48

47

Initial Setting

Setting the Rear Output (FRT+REAR)

This product’s rear output (rear speaker leads output and RCA Rear output) can be used
for full-range speaker (“FRT+REAR”) or Subwoofer (“FRT+S/W”) connection. If you
switch Rear Output setting to the “FRT+S/W”, you can connect a rear speaker lead directly
to a Subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speaker connection (“FRT+REAR”).

Note:

•  Even if you change this setting, there is no output unless you switch the Subwoofer Output (refer to

page 41) in the Audio Menu ON.

•  Both rear speaker leads output and RCA Rear output are switched simultaneously in this setting

mode.

Note:

•  When no Subwoofer is connected to the rear output, select “FRT+REAR”.
•  When a Subwoofer is connected to the rear output, set for Subwoofer “FRT+S/W”.

2. Change the Rear Output set-

ting with the 

5

/

∞

buttons.

1. Press the FUNCTION button and select the Rear Output setting mode

(FRT+REAR) in the Initial Setting Menu.