Магнитолы LG LPC-53 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
PORTABLE MP3/CD CASSETTE RECORDER
]
OWNER’S MANUAL
11
Troubleshooting
Designs and specifications are subject to change without notice.
Symptom
Cause
Correction
Specifications
General
Power supply
Refer to the back panel of the unit.
Power consumption
Refer to the back panel of the unit.
Net Weight
2.61 kg
External dimensions (W x H x D)
391 x 162 x 280 mm
Output Power (T.H.D 10%)
2.5 W X 2 Ch
Speakers
3 Ohm X 2
Battery Operation
DC 9 V
Tuner
FM
Tuning Range
87,5 - 108,0 MHz or 65 - 74 MHz,
87,5 - 108,0 MHz
Intermediate Frequency
10.7 MHz
Antenna
Telescopic antenna
AM
Tuning Range
522 - 1620 kHz or 520 - 1720 kHz
Antenna
Ferrite bar antenna
CD
Frequency response
100 - 18000 Hz
Signal-to-noise ratio
55 dB
T.H.D
0.5 %
Cassette tape player
Recording System
AC Bias Magnet Erase
Frequency Response
125 - 8000 Hz
Signal to Noise Ratio
40 dB
USB
Version
1.1
No power
POWER
The power cord is not plugged in.
The battery is not remaining.
Plug in the power cord.
Change the battery with a new
one.
No sound
Some noise
occurs.
RADIO
The function switch is not set to
the Radio mode.
There are electronic devices near
the player.
Set the switch to the Radio mode.
Set the player far from the
devices.
The unit does not
start playback
CD
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
Insert a playable disc.
Place the disc with the playback
side down.
Place the disc on the disc tray
correctly inside the guide.
Clean the disc.
Unable to record
TAPE
Record protect tabs are removed.
Cover holes on back edge of tape
with tap.
Remote control
The remote control
does not work
properly.
The remote control is too far from
the unit.
There is an obstacle in the path of
the remote control and the unit.
The battery in the remote control is
exhausted.
Operate the remote control within
about 23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
Notice (the date of the production of goods).
First figure (of the left) of series number means
Year, next 2 figures
- month of the production of this goods.
