Магнитолы Kenwood KRC-594(V) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Setting the operation check sound (beep sound) ON/OFF.
Display
Setting
"Beep ON"/ "BEEP ON"
Beep is heard.
"Beep OFF"/ "BEEP OFF"
Beep canceled.
Touch Sensor Tone
2
Do the step 4 through 7 step operation, and reenter the
security code.
"APPROVED" is displayed.
The unit can be used.
If an incorrect code is input, "Waiting"/ "WAITING" is displayed, and
the input prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is displayed, and
input can be done.
Number of times
Input prohibited time
the incorrect code was input
1
—
2
5 minutes
3
1 hour
4
24 hours
When the Security Code function is activated it can't be released.
Note, your Security Code is the 4 digit number entered in your "Car
Audio Passport" in this package.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security"/ "SECURITY" is displayed.
3
Enter Security Code mode
Press the [
4
] or [
¢
] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4
Select the digits to enter
Press the [
4
] or [
¢
] button.
5
Select the Security Code numbers
Press the [FM] or [AM] button.
6
Repeat steps 4 and 5, and complete the Security Code.
7
Confirm the Security Code
Press the [
¢
] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
8
Do the step 4 through 7 step operation, and reenter the
security code.
"APPROVED" is displayed.
The Security Code function activates.
If you enter a Code different from your Security Code, you have to
start over from step 4.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
— 21 —
