JVC KS-F345 - Инструкция по эксплуатации - Страница 7

7

ENGLISH

2

Press and hold 

 or 

 until “M”

(manual) starts flashing on the
display.

3

Tune in to a station you want while
“M” (manual) is flashing.

• If you release your finger from the button,

the manual mode will automatically turns
off after 5 seconds.

• If you hold down the button, the frequency

keeps changing in 50 kHz intervals
(87.5 MHz – 108.0 MHz), or in 30 KHz
intervals (65.0 MHz – 74.0 MHz) for FM,
and 9 kHz intervals for AM—MW/LW until
you release the button.

When an FM stereo broadcast is hard to
receive:

Press MO (monaural), while
listening to an FM stereo
broadcast.
Each time you press the button,
the MO indicator lights up and
goes off alternately.

When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.

To tune in to stations of lower
frequencies

To tune in to stations of higher
frequencies

MO

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).

1

Select the FM band (FM1 – 3) you
want to store FM stations into.

2

Press and hold both buttons for
more than 2 seconds.

Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.

“- -SSM- -” appears, then disappears when
automatic preset is over.

SSM

FM

FM1

FM2

FM3

EN06-08KS-F345[EE]f.p65

11/14/02, 3:45 PM

7