JVC KD-SHX751 - Инструкция по эксплуатации - Страница 51

51

ENGLISH

To be continued....

Playing a disc/SD card

•  While playing an audio CD: If a title has been 

assigned to the audio CD (see page 41), it will 
be shown on the display.

•  While fast-forwarding or reversing an MP3 or 

WMA track, you can only hear intermittent 
sounds.

•  While playing an SD card, the playback order 

may differ from the one played back using 
other SD players.

•  This receiver may be unable to play back 

some SD card due to their characteristics or 
recording conditions.

•  This receiver cannot play back mini SD card 

and MMC.

•  If the inserted SD card does not have the 

correct files, you cannot select “SD” for the 
playback source.

Playing a CD-R or CD-RW

•  Use only “finalized” CD-Rs or CD-RWs.
•  This receiver can play back only the files of 

the same type which is first detected if a disc 
includes both audio CD (CD-DA) files and 
MP3/WMA files.

•  This receiver can play back multi-session 

discs; however, unclosed sessions will be 
skipped while playing.

•  Some CD-Rs or CD-RWs may not play 

back on this receiver because of their disc 
characteristics, and for the following causes:

  – Discs are dirty or scratched.
  – Moisture condensation occurs on the lens 

inside the receiver.

  – The pickup lens inside the receiver is dirty.
  – CD-R/CD-RW on which the files are 

written with “Packet Write” method.

  – Improper recording conditions (missing 

data, etc.) or media conditions (stain, 
scratch, warp, etc.).

•  CD-RWs may require a longer readout time 

since the reflectance of CD-RWs is lower 
than that of regular CDs.

•  Do not use the following CD-Rs or CD-RWs:
  – Discs with stickers, labels, or protective seal 

stuck to the surface.

  – Discs on which labels can be directly 

printed by an ink jet printer.

  Using these discs under high temperatures or 

high humidities may cause malfunctions or 
damages to discs.

Playing an MP3/WMA track

•  This receiver can play back MP3/WMA files 

with the extension code <.mp3> or <.wma> 
(regardless of the letter case—upper/lower).

•  This receiver can show the names of albums, 

artists (performer), and ID3 Tag (Version 1.0, 
1.1, 2.2, 2.3, or 2.4) for MP3 files and for 
WMA files.

•  This receiver can display only one-byte 

characters. No other characters can be 
correctly displayed (see page 49).

•  This receiver can play back MP3/WMA files 

meeting the conditions below:

  – Bit rate: 8 kbps — 320 kbps
  – Sampling frequency:
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
    48 kHz, 44.1 kHz, 32 kHz (for WMA)
  – Disc format: ISO 9660 Level 1/ Level 2, 

Romeo, Joliet, Windows long file name

•  For MP3/WMA discs: 
  The maximum number of characters for file/

folder names vary among the disc format used 
(includes 4 extension characters—<.mp3> or 
<.wma>).

  – ISO 9660 Level 1: up to 12 characters
  – ISO 9660 Level 2: up to 31 characters
  – Romeo*: up to 128 (72) characters
  – Joliet*: up to 64 (36) characters
  – Windows long file name*: up to 128 (72) 

characters

  * The parenthetic figure is the maximum 

number of characters for file/folder names 
in case the total number of files and folders 
is 313 or more.