JVC KD-R407 - Инструкция по эксплуатации - Страница 17

ENGLISH

17

SETTINGS

Category Menu items

Selectable settings, [reference page]

AUDIO

VOL ADJUST

Volume adjust

VOL ADJ –05 —
VOL ADJ +05

(Initial: VOL ADJ 

00)

:  Preset the volume adjustment level of each source (except 

FM), compared to the FM volume level. The volume level 
will automatically increase or decrease when you change 
the source.

  •  Before making an adjustment, select the source you 

want to adjust.

  •  “VOL ADJ FIX” appears on the display if “FM” is selected 

as the source.

L/O MODE

Line output mode

• 

SUB.W

• 

REAR

:  Select if the REAR LINE OUT terminals are used for 

connecting a subwoofer (through an external amplifier).

:  Select if the REAR LINE OUT terminals are used for 

connecting the speakers (through an external amplifier).

SUB.W FREQ 

*

9

Subwoofer cutoff 
frequency

• 

LOW

• 

MID

• 

HIGH

:  Frequencies lower than 72 Hz are sent to the subwoofer.
:  Frequencies lower than 111 Hz are sent to the subwoofer.
:  Frequencies lower than 157 Hz are sent to the subwoofer.

SUB.W LEVEL 

*

9

Subwoofer level

SUB.W 00 
— SUB.W 08

:  Adjust the subwoofer output level.
  (Initial: SUB.W 04)

BEEP

Keypress tone

• 

BEEP OFF

• 

BEEP ON

:  Deactivates the keypress tone.
:  Activates the keypress tone.

TEL MUTING

Telephone 
muting

• 

MUTING 1/
MUTING 2

• 

MUTING OFF

:  Select either one which mutes the sounds while using a 

cellular phone.

: Cancels.

AMP GAIN 

*

10

Amplifier gain 
control

• 

LOW POWER

• 

HIGH POWER

:  VOLUME 00 – VOLUME 30 (Select if the maximum power 

of each speaker is less than 50 W to prevent damaging the 
speaker.)

:  VOLUME 00 – VOLUME 50

SRC SELECT

AM 

*

11

AM station

• 

AM OFF

• 

AM ON

:  Disable “AM” in source selection.
:  Enable “AM” in source selection, [4].

AUX IN 

*

12

Auxiliary input

• 

AUX OFF

• 

AUX ON

:  Disable “AUX IN” in source selection.
:  Enable “AUX IN” in source selection, [4].

*

9

  Displayed only when “

L/O MODE

” is set to “

SUB.W

.”

*

10

 The volume level automatically changes to “VOLUME 30” if you change to “

LOW POWER

” with the volume level 

set higher than “VOLUME 30.”

*

11

 Displayed only when any source other than “AM” is selected.

*

12

 Displayed only when any source other than “AUX IN” is selected.