Магнитолы JVC KD-LHX557 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
52
ENGLISH
Symptoms
Causes
Remedies
Graphics
• Download does not seem
to finish.
It takes quite a long time to
download an animation of
many frames (see page 49).
• Opening and ending
animation does not appear.
“KeyIn CFM” is set to
“Off.”
Select “On” (see page 31).
• Animation does not move.
Temperature inside the car
is below 0°C—
appears on the display.
Wait until the operating
temperature resumes.
• The entire animation has
not been downloaded.
“OPENING” and
“ENDING” can only
memorize 30 frames of the
animation even it includes
90 frames.
Preferred setting modes—PSM
• “MOVIE” category
settings do not take effect.
Temperature inside the car
is below 0°C—
appears on the display.
Wait until the operating
temperature resumes.
• You cannot select an
image for “UserPict.”
(“---------” appears for the
file name on the lower part
of the display).
No files are downloaded yet.
Select an image only after
downloading the appropriate
files in memory.
CD changer
• “No Magazine” flashes on
the display.
No magazine is loaded in the
CD changer.
Insert the magazine.
• “No Disc” flashes on the
display.
Disc is inserted upside down.
Insert disc correctly.
No disc is in the magazine.
Insert disc into the magazine.
• “Reset 08” flashes on the
display.
This receiver is not
connected to the CD changer
correctly.
Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
• “Reset 01” – “Reset 07”
flashes on the display.
The CD player may have
functioned incorrectly.
Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver (see page
2).
