JVC KD-DV7408 - Инструкция по эксплуатации - Страница 29

ENGLISH

29

EXTERNAL DEVICES

2

  Select a device you want to connect.

3

  •  For available devices...

1

  Enter the specific PIN code of the device to 

the unit.

Refer to the instructions supplied with the 
device to check the PIN code.

2

  Use the Bluetooth device to connect.

Now connection is established and you can 
use the device through the unit.

•  For special device...

  Use “Open” or “Search” to connect.

Connecting/disconnecting/deleting a 
registered device

1

  Select “BT-PHONE” or “BT-AUDIO.”

2

  Select a registered device you want to 

connect/disconnect/delete.

3

  Enter setting menu.

4

  •  Select “Connect” or “Disconnect” to 

connect/disconnect the selected device.

2

  Select a number or blank space.

3

  Repeat steps 

1

 and 

2

 until you finish 

entering a PIN code.

4

  Confirm the entry.

“Open...” flashes on the display.

6

  Use the Bluetooth device to search and 

connect.

On the device to be connected, enter the same 
PIN code you have just entered for this unit. 
“Connected (and device name)” appears on the 
display.

Now connection is established and you can use the 
device through the unit.

The device remains registered even after you 
disconnect the device. Use “

Connect

“ (or activate 

“

Auto Connect

”) to connect the same device from 

next time on. (See the following and page 49.)

Connecting a device

Perform steps 

1

 – 

3

 on page 28, then...

1

  •  Select “Search” to search for available 

devices.

The unit searches and displays the list of the 
available devices.

If no available device is detected, “Device not 
found” appears.

•  Select “Special” to connect a special device.

The unit displays the list of the preset devices.

Continued on the next page