JVC KD-AVX33 - Инструкция по эксплуатации - Страница 68

ENGLISH

68

Symptoms

Remedies/Causes

Bluetooth

•  Bluetooth device does not detect the unit.

This unit can be connected with one Bluetooth cellular 
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected 
from another device. Disconnect currently connected device 
and search again.

•  The unit does not detect the Bluetooth 

device.

•  Check the Bluetooth setting of the device.
•  Search from the Bluetooth device. After the device 

detects the unit, select <

Open

> on the unit to connect 

the device. (

☞

 page 34)

•  The unit does not make pairing with the 

Bluetooth device.

•  Enter the same PIN code for both the unit and target 

device. If the PIN code of the device is not indicated on its 
instructions, try “0000” or “1234.”

•  Select the device name from <

Special Device

>, then 

try to connect again. (

☞

 page 35)

•  Echo or noise occurs.

Adjust the microphone unit position.

•  Phone sound quality is poor.

•  Reduce the distance between the unit and the Bluetooth 

audio device.

•  Move the car to place where you can get a better signal 

reception.

•  The sound is interrupted or skipped during 

playback of a Bluetooth audio device.

•  Reduce the distance between the unit and the Bluetooth 

audio device.

•  Disconnect the device connected for “Bluetooth phone.”
•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect the device 

again.

•  “New Device” cannot be selected for 

“Bluetooth Audio.”

Bluetooth audio device is being connected. To select “New 
Device,” disconnect it. (

☞

 page 35)

•  The connected audio device cannot be 

controlled.

Check whether the connected audio device supports AVRCP 
(Audio Video Remote Control Profile).

CD changer

•  “No Disc” appears on the monitor.

Insert a disc into the magazine.

•  “No Magazine” appears on the monitor.

Insert the magazine.

•  “Cannot play this disc Check the disc” appears 

on the monitor.

Disc does not include playable files. Replace the disc with 
playable files.

•  “Reset 08” appears on the monitor.

Connect this unit and the CD changer correctly and press 
the reset button of the CD changer.

•  “Reset 01” – “Reset 07” appears on the 

monitor.

Press the reset button of the CD changer.

•  The CD changer does not work at all.

Reset the unit. (

☞

 page 3)