Hyundai Electronics H-CMMD4059G - Инструкция по эксплуатации - Страница 16

16

Operation

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

AF (Alternative frequencies) function

Briefly press AF/TA button on the RC or press 

and hold AF/TA button on the panel to enable 
AF function. When the radio signal strength is 
poor, enabling the AF function will allow the unit 
to automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press and hold AF/TA button on the RC or 

press AF/TA button on the panel to switch on 
the TA function. When TA is on, the TA displays 
on TFT, or else, if there is no TP information, 
the mode will search TP station automatically. 
When TA is playing, the volume will be adjusted 
to a TA level automatically. When other modes 
are activated (such as DVD, AUX), if a TA 
program is played the mode will skip to the 
RDS mode automatically. It will resume to the 
primary mode after the TA is over.

Program type (PTY)

Press PTY button on the RC or on the panel 

to activate the PTY function, press it repeatedly 
to show Music group/Speech group/PTY off. 
Choose the needed PTY type by pressing the 
icon in the touchable screen or pressing the 
corresponding number buttons on the RC. 
When PTY search is on, and the selected type 
matches, PTY information is displayed. If PTY 
code is different or not available, PTY NONE 
icon will blinks, PTY engaging automatically 
exit to normal mode.

the nearest station upwards.

Band selection

Press BAND/RDM button on the RC or 

BND/P.SCN button on the panel to switch to 
the bands in the following order: FM1 - FM2 - 
FM3 - MW1 - MW2.

Manual/automatic tuning

•  Manual tuning: press 

/

 buttons on 

the panel or SEEK-/

 and SEEK+/

 on the 

RC and hold for 2 seconds to enter the manual 
tuning mode. Press these buttons repeatedly to 
select a frequency downward or upward step 
by step.

•  Automatic tuning: press 

/

 buttons 

on the panel or SEEK-/

 and SEEK+/

 on 

the RC, the automatic search will start. It will 
play when finds the station.

Programming tuner stations

There are 6 numbered preset buttons on 

the RC, with which you can store and recall 
stations for each band (18 FM, 12 MW). Select 
a station, then press and hold a preset button. 
The station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

BAND/P.SCN button on the panel or P.SCN/
RPT button on the RC to enter auto store mode. 
The radio will automatically store 6 stations to 
the 6 preset memories of the current band. To 
stop auto store, press the button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan: Select a band, press BAND/P.

SCN button on the panel or P.SCN/RPT button 
on the RC to scan all preset stations in the 
memories of the current band. To stop preset 
scan, press the button again.