Hyundai Electronics H-CMDN6100 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you need.

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press RES button on the unit with a 
pointed object (such as a ballpoint pen) to set 
the unit to initial state.

  When some errors occur on the display, 

you can also press RES button to resume to 
normal, and it will erase the clock setting and 
some memorized functions.

Turning the unit on/off

Press PWR/SOURCE button on the RC or 

PWR/SRC button on the panel to turn on the 
unit. Press and hold the button more than 2 
seconds to turn off the unit.

Open the monitor

Press REL button on the unit or   button on 

the RC to slant the monitor. Press the button 
again, the monitor returns to the previous state.

Angle setting

You can adjust the desired angle of the 

monitor. Press and hold REL button till ANGLE 
appears on the display. Press VOL+ button 
on the panel to adjust monitor backward by 
definite angle; press VOL- button on the panel 
to adjust the monitor forward.

  Please do not adjust the monitor tilt 

manually, otherwise it can get damaged.

Night mode

Press and hold MUT button on the panel to 

enter the night mode of the display; press it 
again to switch to the normal mode.

Volume control

Press VOL+/VOL- buttons on the RC or on 

the unit to increase/decrease the sound level.

Setting the sound characteristics

Repeatedly press SEL button on the RC 

or NAVI/SEL button on the unit to select the 
desired parameter in the following order: VOL 
=> BALAN => FADE => BASS => TREBL => 
SUBWF. After selecting the desired parameter, 
you can adjust its current level by pressing 
VOL+/- buttons on the RC or on the unit.

Mute function

Press   button on the RC or MUT 

button on the unit to turn off the sound. The 
corresponding icon appears on the TFT. Press 
the button again or adjust volume to resume 
the sound output.

Equalizer setting

While listening to music of any kind, you 

can select the corresponding preset modes 
to adjust the sound quality perfectly by using 
AF/EQ button on the RC. Press and hold the 
button repeatedly to choose the following 
modes in turn: POP => CLAS => ROCK => 
OFF. The default setting is OFF.

Loudness

Press and hold TA/LOUD button on the 

RC to activate loudness function. This is to 
increase the low frequency, which can improve 
sensitivity for your ears. Keep pressing it again 
to quit this function.

Mode selection

Repeatedly press PWR/SOURCE button 

on the RC or PWR/SRC button on the unit to 
select a mode: Radio => DVD => SD Card => 
TV => AUX => USB. Or in any mode touch 
SRC item on the screen to display the Main 
menu. In the menu, touch the item of the mode 
you need to select the corresponding mode.

  The DVD, SD Card and USB modes are 

only available when corresponding storages 
are inserted into the unit. If a mode in the menu 
is in cyan font, this mode is not supported by