Hyundai Electronics H-CMD4027 - Инструкция по эксплуатации - Страница 16

16

Operation

introduction function. Several initial seconds 
of each track will be played. Press the button 
again to cancel intro playback.

GOTO

Press and hold AUDIO/GOTO button to 

show the playback parameters for the current 
chapter/track/time (track/title/chapter number or 
time). Press cursor buttons to navigate between 
the parameters and use number buttons to 
input needed settings. Press OK button on 
the panel or ENTER button on the RC to start 
playback from the set number or time.

Random playback

Press BND/RDM button on the RC to 

activate random playing mode. Press one more 
time to return to normal playing.

Programming the playback

•  Press PTY/PROG button to open program 

menu.

•  Use cursor buttons to select the program 

position and use number buttons to input the 
desired track/title/chapter (depending on the 
disc type).

•  Press 

 button on the RC or MEM/

button on the panel to start program play, or 
move the cursor to select PLAY and press 
ENTER button on the RC or OK button on the 
panel to play.

•  Move the cursor to CLEAR, press ENTER 

button on the RC or OK button on the panel to 
delete the programmed list. Press PTY/PROG 
button to quit programming.

OSD (On Screen Display) function

Press and hold OSD button on the 

RC repeatedly to show current playback 
information, such as number of track/chapter/
title, current track/chapter/title time elapsed/
remaining, total track/chapter/title time 
remaining (depending on the disc type).

Zooming in/out

During playback of video or images on disc/

USB/SD/MMC, press and hold repeatedly 
A-B/ZOOM button on the RC, the picture will 
be zoomed in the sequence: X2 =>X3 =>X4 
=>X1/2 => X1/3 => X1/4 => Normal.

PBC (Playback Control) function 

(for 

VCD only)

This function is only available for the VCD 

with PBC function.

Press and hold  /PBC button on the RC to 

set PBC on/off; when PBC is off, the screen will 
show PBC menu if you switch PBC on. If the 
menu consists of a list of titles, you can select a 
desired one using number buttons on the RC.

Changing angle

 (for DVD only)

Press ANGLE button on the RC to playback 

images at different camera angles. If a disc 
doesn’t support multi-angle playback, this 
function will not work.

Selecting audio language 

(for DVD only)

During DVD disc playback, press AUDIO/

GOTO button on the RC repeatedly to select 
the audio language to listen. This function will 
not work if a disc does not support multi-
language audio.

Selecting subtitle language 

(for DVD 

only)

If your DVD disc supports multi-language 

subtitle, press SUB-T button on the RC 
repeatedly to switch among disc-supported 
languages.

Selecting sound channel 

(for VCD only)

During VCD disc playback press AUDIO/

GOTO button on the RC to select the channel: 
Mono L => Mono R => MIX Mono => Stereo.

Menu navigation

 (for DVD only)

Press and hold MENU button on the RC 

to activate the disc menu list on the screen. 
Choose the desired item. Press ENTER button 
or 

 button on the RC or OK button on the 

panel to confirm the selected item and start