Hyundai Electronics H-CMD4016 - Инструкция по эксплуатации - Страница 10

10

Operation

Mode setting

Press MODE semgent on the panel or 

MODE button on the RC to select between unit 
operation modes: Disc => Radio => USB => SD.

  USB, SD, Disc modes will only be 

available when a USB device, memory card or 
a disc is inserted into the unit.

Radio operations

Band selection

Press repeatedly BND/AMS segment on the 

panel or BND/SYS button on the RC to select 
your desired radio band in Radio mode: FM1, 
FM2, FM3, AM1 (MW1), AM2 (MW2). In each 
set of the bands you can store up to 6 preset 
stations, making total 30 preset memory stations.

Manual/automatic tuning

Manual tuning: To find a station, select 

a band first, then press repeatedly 

/

segments on the panel or SEEK-/

 or 

SEEK+/

 buttons on the RC to search for 

the needed frequency step by step.

Automatic tuning: To find a station, select 

a band first, then press and hold 

/

segments on the panel or SEEK-/

 or 

SEEK+/

 buttons on the RC; the automatic 

downward/upward search will start. It will play 
when a station is found.

Programming preset stations

•   To store a station: Select a band (if 

needed); find a station by manual/automatic 
tuning. Then press and hold a number button 
(1-6) on the RC or on the panel to save the 
station in the corresponding memory position.

•   To recall a station: Select a band (if 

needed); press a number button (1-6) on the 
RC or on the panel to call the station saved in 
the corresponding position.

Auto memory store

Select a band, press and hold BND/AMS 

segment on the panel or AMS/RPT button on 

General operations

Turning on/off

Press POWER button on the panel or the RC 

to turn on the unit. To switch the unit off, press 
POWER button on the panel or on the RC. 

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the unit.

Press OPEN button on the panel to open the 

panel and press RESET button to restore the 
unit to its original factory settings.

Volume control

Rotate VOL knob or press VOL+/VOL- 

buttons on the RC to adjust the volume level.

Mute function

Press MUTE button on the panel or on the 

RC to turn the sound off. Press it again or 
adjust the volume to turn the sound on.

System parameter setting

Press SEL button on the panel or RC once to 

enter AUDIO SETUP or twice to enter SYSTEM 
SETUP menu. In the menu, press 

/

segments on the panel or SEEK-/

 or SEEK+/

 buttons on the RC to select a parameter. 

Rotate VOL knob or press VOL+/VOL- buttons 
on the RC to adjust each parameter.

•   AUDIO SETUP:
BASS: -7, ... +7
TREBLE: -7, ... +7
BALANCE: -7, ... +7
FADER: -7, ... +7
EQ: ROCK=>POP=>CLASS=>JAZZ=>FLAT
LOUD: ON/OFF
•   SYSTEM SETUP:
DISP: ON/OFF (on is to display clock)
CLOCK: adjust clock
DEFAULT: RESTORE (to factory settings)

  If the unit is turned off, all the settings of 

each mode will be saved. If cutting off battery 
power or resetting the unit, all the settings will 
return to factory default settings.