Магнитолы Hyundai Electronics H-CMD4015 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
32
The RDS data are the
PI, PS, TP, PTY, TA
and
AF
data
.
PI:
Program Identification code. Code for identifying program
PS:
Program Service Name. Broadcasting station name data expressed in alphanumerically character.
TP:
Traffic Program Identification. Identification data for traffic information broadcasting station.
TA
: Traffic Announcement. Identification data showing traffic information is being transmitted or not.
AF:
Alternative Frequencies. Frequency list of broadcasting station transmitting the same program.
Note:
When using the RDS function, always set the radio to the FM mode.
To switch to RDS operating interface
Pressing the icon
on the touch screen, you can use the RDS control icons
,
,
or
on the
bottom of the touch screen as below.
Setting AF mode
Briefly press AF/REG button or click the icon
on the touch screen to switch the AF mode on/off.
Whenever RDS is on, symbol “AF” appears on the touch screen.
Program name is displayed on receiving a RDS station. “AF” starts blinking if the broadcasting signals getting
worse.
There are 3 state the segment AF on the TFT display:
Segment “AF” off:
AF switching mode off.
Segment “AF” on:
AF switching mode on, and has RDS information.
Segment “AF” flashing:
AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of
checking time of each AF depends on the signal strength of the current station, from a few minutes for a strong
station to a few seconds for a weak state.
