Hyundai Electronics H-CMD4003 - Инструкция по эксплуатации - Страница 22

22

Loading a disc

Press EJECT button on the panel to flip it down. Insert the disc with the printed side facing upward into the
slot. Close the panel. The disc will be loaded and played automatically. If the unit is in another mode, press
MODE button on the RC or SRC button on the unit to select DISC mode.
Press EJECT button on the panel to eject the disc.

Inserting a SD/MMC card/USB device

Insert the MMC/SD card into the corresponding slot on the top of the panel and insert USB device into the USB
jack on the panel. The unit will automatically switch to the needed mode.
If a USB driver is connected to the unit, the unit cannot switch to SD/MMC reading mode automatically when
you  insert  a  SD/MMC  card,  except  after  taking  out  the  USB.  If  the  unit  is  reading  the  files  in  the  SD/MMC
card, the unit cannot switch to USB reading mode automatically when you connect a USB driver, except after
taking out the SD/MMC card.

Note:

Some USB driver models cannot be supported by this unit.

Playing/pausing

When the disc/card/USB has been loaded, the playback of the first track starts automatically. To ensure good
system performance, wait until the unit finishes reading the disc information before proceeding. Or press the
PLAY/PAUSE  button  to  start  playback.  Press  it  again  to  pause  the  playback.  Press  again  to  resume  the
playback.

Stop playback

During playback, press STOP button on the RC. Playback will be stopped.
For  DVD  discs:  If  PLAY/PAUSE  button  is  pressed,  playback  will  start  from  the  position  at  which  it  was
stopped. If the disc is removed, the resume function is cancelled. Press STOP button on the RC again to finally
stop the playback.