Hyundai Electronics H-CDM8072 - Инструкция по эксплуатации - Страница 10

10

Operation

power is on. Press PTY/CLK button (in radio 
mode - press and hold the button) and then 
press and hold the button for 2 seconds, the 
time indication will blink on the display. Rotate 
VOLUME regulator on the panel or press 
VOL+/- buttons on the RC to adjust hours. 
Press SEL button to go to minute setting. 
Rotate VOLUME regulator on the panel or 
press VOL+/- buttons on the RC to adjust 
minutes. Press PTY/CLK button on the panel 
or CLK button on the RC again or leave the 
unit idle for the new setting to take effect.

Press PTY/CLK button on the panel or CLK 

button on the RC (in radio mode press and 
hold the button) to view the time display.

AUX in jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band select

Press BND/ID3 button on the panel or 

BAND button on the RC repeatedly to select 
your desired radio band during Radio mode: 
FM1, FM2, FM3, AM1 (MW1), AM2 (MW2). 
In each set of the bands you can store up to 6 
preset stations, making total 30 preset memory 
stations.

Auto/Manual tuning

Press and hold 

/

 buttons to display 

MANU TUNE. Now you can press these 
buttons repeatedly to adjust the needed 
frequency manually.

To adjust the needed frequency 

automatically, press 

/

 buttons. The radio 

regulator on the panel or press VOL+/- buttons 
on the RC to adjust the selected parameter. 
Balance is to adjust the balance between the 
left and right speakers. Fader is to adjust the 
balance between the rear and front speakers. 
After you have reached your desired effect, 
leave the unit idle in order for the new setting 
to take effect.

Beep

Press SEL button repeatedly until the display 

show BEEP ON; rotate VOLUME regulator on 
the panel or press VOL+/- buttons on the RC 
to toggle between BEEP ON (beep sound will 
be heard when buttons are pressed) and BEEP 
OFF, then leave the unit idle for the new setting 
to take effect.

EQ modes

Press SEL button repeatedly until the display 

show EQ OFF. Rotate VOLUME regulator on 
the panel or press VOL+/- buttons on the RC to 
choose an equalizer effect: POP => ROCK => 
CLASS => FLAT => EQ OFF. After you have 
reached your desired effect, leave the unit idle 
in order for the new setting to take effect.

Loudness

Press SEL button repeatedly until the 

display shows LOUD ON (LOUD OFF). Rotate 
VOLUME regulator on the panel or press 
VOL+/- buttons on the RC to select between 
LOUD ON/LOUD OFF. LOUD function is to 
emphasize the bass output; the word LOUD 
ON indicates that the LOUD mode is on.

Color

Press repeatedly SEL button to select 

COLOR1 (COLOR2). Rotate VOLUME 
regulator on the panel or press VOL+/- buttons 
on the RC to select between COLOR1 (red 
panel backlight) or COLOR2 (green color 
backlight).

Clock setting

The clock can be set anytime when the