Магнитолы Hyundai Electronics H-CDM8054 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
Press 7/AF button to switch on or off the RDS mode. Whenever RDS is switch on, “RDS” will flash on the display.
Press 9/PTY button to enter PTY Select mode; the program name will be displayed on the display. You can use VOL knob to select
the items and press FWD/REW buttons to begin searching the corresponding program.
RDS menu
Press and hold 9/PTY button to enter the RDS Menu; in the menu, use VOL knob to select the items and press FWD/REW buttons to
adjust corresponding item. After choosing, please leave the unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the alarm is set off.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode,
the unit will mask the AF which has different PI and no RDS signal with high field strength.
RETUNE SHORT/LONG
“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. SHORT represents a time period of
30 seconds; LONG represents a time period of 90 seconds.
REGION: OFF/ON
In Region ON mode, AF switching or PI SEEK is implemented to the station which have all PI codes are the same as current station.
In Region OFF mode, the regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
TA-VOLUME:
The default TA volume value is 18; you can adjust it from 0 to 40.
TA (Traffic Announcement) function
Press and hold 8/EQ/TA button to switch TA mode on or off. When TA mode is on and a traffic announcement is transmitted, if the
unit was in CD or AUX IN mode, it will switch to Radio mode. If the volume level was under the threshold point, it will be raised to
the threshold point. But if the user changed the volume level, which was more than the threshold point (min. TA volume level), it will
be set to the last level. When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual
segment is turned on. The current traffic announcement is cancelled by pressing 8/EQ/TA button. But the TA mode will not be off.
