Hyundai Electronics H-CDM8035RG - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

the time indication will blink on the display. 
Rotate VOLUME knob or press 

/

buttons on the RC to adjust hours. Press SEL/

 button to go to setting minutes. Rotate 

VOLUME knob or press 

/

 buttons on 

the RC to adjust minutes. Press 

 button on 

the RC or PTY/CLK button on the unit for the 
new setting to take effect.

Press 

 button on the RC or PTY/CLK 

button on the unit anytime to view the time 
display.

Subwoofer control

Press and hold the BND/SUB button to turn 

the subwoofer output ON. An external amplifier 
is required to operate a subwoofer.

AUX in jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band select

Press repeatedly BAND/SUB button on the 

panel or 

 button on the RC to select your 

desired radio band during RADIO mode: FM1, 
FM2, FM3, AM1 (MW1), AM2 (MW2). In each 
set of the bands you can store up to 6 preset 
stations, making total 30 preset memory stations.

Auto/Manual tuning

Press and hold PREVIOUS/NEXT buttons 

on the panel or 

/

 buttons on the RC to 

automatically adjust the radio frequency. The 
radio will seek to the next up or down strong 

and clear frequency station. Repeat this action 
to seek for other desired stations. To adjust the 
needed frequency manually, press repeatedly 
PREVIOUS/NEXT buttons on the panel or 
/

 buttons on the RC.

Programming tuner stations

There are six numbered preset buttons, 

under which you can store and recall stations 
for each band. Select the needed station, 
then press and hold a preset button. The 
station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

Automatic store/preset scan

Automatic store
Press and hold F/PS button on the panel 

or 

 button on the RC. The radio will 

automatically store the 6 strongest available 
stations to the 6 preset memories of the current 
band. To stop auto store, press this button again.

Preset scan

Press F/PS button on the panel or 

button on the RC, the receiver will scan the 
saved stations in the current band.

Mono/Stereo control 

(in FM radio 

mode)

Press SEL/

 button until the display shows 

ST ON (ST OFF). Turn VOLUME knob or press 

/

 buttons on the RC to switch between 

ON (stereo reception) or OFF (mono reception).

Improvement of reception of distant stations 

can be done by selecting mono mode, which 
may cut down some reception noise.

Local radio station search

Press SEL/

 button to choose LOC 

ON (LOC OFF). When the LOCAL function 
is on, the local stations (stations with weak 
radio signal) can be played. When the LOCAL 
function is off both local and distant stations 
(stations with strong radio signal) can be played.