Hyundai Electronics H-CDM8035RG - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

General operations

Turning on/off

Press any button on the RC or on the unit 

(except REL and EJECT buttons) to switch 
the unit on. The display will show a message 
WELCOME to indicate it is ready to use. Press 
and hold POWER button on the unit or 

button on the RC to turn the unit off.

  After the unit is off, volume level and 

radio current settings will be memorized, and 
when you turn the unit on it will resume the 
stored status you set.

Mode selecting

Press MODE/

 button to select between 

unit operation modes: AUX => RADIO => DISC 
=> USB => CARD.

  USB, CARD, DISC modes will only 

show on the display when a USB device, 
memory card or a disc is inserted into the unit.

Volume control

The volume level can be adjusted at any 

time by rotating VOLUME knob or pressing 

/

 buttons on the RC.

Mute function

Press MUTE/

 button to cancel the 

sound. Press it again or change the volume 
level to resume the sound.

Audio parameter setting

Press repeatedly SEL/

 button to select 

bass, treble, balance or fader mode. The 
corresponding word appears on the display. 
Rotate VOLUME knob or press 

/

buttons on the RC to adjust the selected 
parameter. When DSP is on, treble and bass 
control is not available. Balance is to adjust the 
balance between the left and right speakers. 
Fader is to adjust the balance between the rear 
and front speakers.

In each mode, the waiting time is about 

5 seconds, and the waiting time is over, it 
returns to the last display mode of radio or disc 
playback mode.

Beep

Press repeatedly SEL/

 button to select 

BEEP ON; rotate VOLUME knob or press 

/

 buttons on the RC to toggle between BEEP 

ON (beep sound will be heard when buttons are 
pressed) and BEEP OFF, then leave the unit 
idle for the new setting to take effect.

Equalizer modes

Press repeatedly SEL/

 button to select 

DSP. Rotate VOLUME knob or press 

/

 buttons on the RC to choose an equalizer 

effect: POP => ROCK => CLASS => FLAT 
=> OFF. After you have reached the desired 
effect, leave the unit idle in order for the new 
setting to take effect.

Loudness

Press repeatedly SEL/

 button to select 

LOUD ON (LOUD OFF). Rotate VOLUME 

knob or press 

/

 buttons on the RC to 

select between LOUD ON/LOUD OFF. LOUD 
function is to emphasize the bass output; the 
word LOUD ON indicates that the LOUD mode 
is on.

Color 

(option)

Press repeatedly SEL/

 button to select 

COLOR1 (COLOR2). Rotate VOLUME knob 

or press 

/

 buttons on the RC to select 

between COLOR1 (red panel backlight) or 
COLOR2 (green color backlight).

Clock setting

The clock can be set anytime when the 

power is on. Press three times 

 button on 

the RC or press PTY/CLK button on the unit, 
then press and hold the button for 3 seconds;