Hyundai Electronics H-CDM8034 - Инструкция по эксплуатации - Страница 10

10

Operation

General operations

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit.

Press OPEN button on the panel to open the 

panel and press RESET button to restore the 
unit to its original factory settings.

Power on/off

Press any button (except OPEN) to turn on 

the unit. Press and hold PWR button to switch 
the unit off.

  After the unit is off, the volume level and 

radio current settings will be memorized, and 
when you turn the unit on it will resume the 
stored status you previously set.

Volume control

Rotate VOL knob on the panel or press V+/V- 

buttons on the RC to adjust the volume level.

Setting the sound parameters

Press repeatedly VOL knob on the panel 

or SEL button on the RC to select an audio 
setting: VOL (volume) => BAS (bass) => TRE 
(treble) => BAL (balance) => FAD (fader). 
Rotate VOL knob on the panel or press V+/- 
buttons on the RC to adjust each setting.

  •  If the unit is turned off, all the settings 

of each mode will be saved.

•  If cutting off battery power or resetting the 

unit, all the settings will return to factory default 
settings.

•  When DSP is set to any mode, Balance 

and Treble are not adjustable.

•  If you don’t adjust the setting within 

several seconds after selecting the desired 
setting, the unit will automatically return to the 
current mode being displayed.

Setting other features

Press and hold VOL knob on the panel or 

SEL button on the RC, and then shortly press 

this knob/button repeatedly to select a setting. 
Rotate VOL knob on the panel or press V+/- 
buttons on the RC to adjust each setting.

INVOL: Set default volume level when the 

unit is turned on.

CLOCK: you can set the clock. Rotate VOL 

knob clockwise to set minutes; rotate VOL 
knob counterclockwise to set hours.

24 HOUR: choose 24 hour clock display 

mode or 12 hour clock display mode.

LOUD ON/OFF: Enable LOUD ON (Default 

is LOUD OFF).

BEEP ON/OFF: if BEEP on, pressing any 

key will make a beep sound.

DSP: Choose intended sound effect in the 

sequence: POP => ROCK => CLASS => FLAT 
=> NONE.

Sound mute

Press MUTE button to turn the sound off. 

Press it again or rotate VOL knob on the panel or 
press V+/- buttons on the RC to resume sound.

Mode select

Press MODE button repeatedly to select: 

TUNER => CD => SD => USB => AUX.

  CD, SD and USB modes are only 

available if corresponding media device is in 
the unit.

Display

Press DIS button repeatedly to see current 

tuning information and time. Sequence of the 
menu: Clock => PTY => PS => Radio frequency.

AUX in jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.