Магнитолы Hyundai Electronics H-CDM8022 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
Important safeguards
•
Using the device at temperature below -10º may cause the breakage of the device. Before using please heat
up the passenger compartment to the recommended temperature!
•
Read carefully through this manual to familiarize yourself with this high-quality sound system.
•
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
•
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the unit.
•
Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
•
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create
safety hazards such as electrical shock or laser beam exposure.
•
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes
normal before operating the unit.
•
Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
•
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or
during a thunderstorm.
•
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an
unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified
technician check the system.
•
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload
or burn out the power amplifier.
•
Do not install the detachable panel before connecting the wire.
