Hyundai Electronics H-CDM8011 - Инструкция по эксплуатации - Страница 12

Магнитолы Hyundai Electronics H-CDM8011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 50
Загружаем инструкцию
background image

12

When TP information gets lost at the current station for retune time which is set by retune time (40 seconds), the
radio  start  to  retune  to  next  same  PI  station.  When  same  PI  station  does  not  catch  in  1  cyclic  search,  the  radio
retunes to next station with TP information.

TA alarm:

 when this mode is selected, any automatic retune mode is not activated. Only double beep sound

(ALARM) is output.
When newly tuned station does not have TP information for 40 seconds, double beep comes out and the display
will show LOST TP TA, but the retune mode won’t be activated.

TA VOL mode: rotate the VOL knob to adjust the TA volume level: 0-40. When TA function is activated, if a
TA program is tuned in at the volume level set regardless of the volume of the other source at the time.
The default level is 18.

Note:

 when the unit tuned into a TA program, the volume level increase/decrease gradually fro m the system

volume.

-  

REG  mode:  rotate  the  VOL  knob  to  choose  REG  ON  (LOCAL)  or  OFF  (DISTANT)  mode.  Local  mode
improves reception in some areas where the signal is too strong.
If ON is selected when the AF search or PI seek, it will be implemented to station which have all PI codes are the
same as current station. If OFF is selected when AF search or PI seek, the regional code in the format PI code is
ignored, and a regional station will be possible received.

-

MASK

 mode: rotate the VOL knob to choose MASK DPI or MASK ALL mode

MASK DPI mode: Only the AF which has different program identification is masked.
MASK ALL mode: The AF which has different program identification and NO RDS signal with high field
strength is masked.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Hyundai Electronics H-CDM8011?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"