Skil 4181 - Инструкция по эксплуатации - Страница 8

8

f) 

keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5) SERVICE

a) 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR JIG SAwS

GENERAl

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the tool (tools with 

a rating of 230V or 240V can also be connected to a 

220V supply)

•  Check the functioning of the tool before each use and, in 

case of a defect, have it repaired immediately by a 

qualified person; never open the tool yourself

• 

Do not work materials containing asbestos

 (asbestos 

is considered carcinogenic)

•  This tool should not be used by people under the age of 

16 years

•  The noise level when working can exceed 85 dB(A); wear 

ear protection

•  Wear protective goggles when working with materials 

which produce chips

•  Dust from material such as paint containing lead, some 

wood species, minerals and metal may be harmful 

(contact with or inhalation of the dust may cause allergic 

reactions and/or respiratory diseases to the operator or 

bystanders); 

wear a dust mask and work with a dust 

extraction device when connectable

•  Certain kinds of dust are classified as carcinogenic (such 

as oak and beech dust) especially in conjunction with 

additives for wood conditioning; 

wear a dust mask and 

work with a dust extraction device when 

connectable

•  Follow the dust-related national requirements for the 

materials you want to work with

•  Use completely unrolled and safe extension cords with a 

capacity of 16 Amps (U.K. 13 Amps)

•  Always disconnect plug from power source before 

making any adjustment or changing any accessory

BEFORE USE

•  Remove all obstacles on top of as well as underneath the 

cutting path before you start cutting

•  Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them before 

you start working

• 

Secure the workpiece

 (a workpiece clamped with 

clamping devices or in a vice is held more securely than 

by hand)

DURING USE

• 

Hold power tool by insulated gripping surfaces, 

when performing an operation where the cutting 

accessory may contact hidden wiring or its own 

cord

 (a cutting accessory contacting a “live” wire may 

make exposed metal parts of the power tool “live” and 

could give the operator an electric shock)

•  Always keep the cord away from moving parts of the tool; 

direct the cord to the rear, away from the tool

•  If the cord is damaged or cut through while working, do 

not touch the cord, but immediately disconnect the plug

•  Never use the tool when cord is damaged; have it 

replaced by a qualified person

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the plug

•  Keep hands away from the saw blade while the tool is in 

use

ACCESSORIES

•  SKIL can assure flawless functioning of the tool only 

when original accessories are used

•  Do not use a saw blade which is cracked, deformed or 

dull

OUTDOOR USE

•  When used outdoors, connect the tool via a fault current 

(FI) circuit breaker with a triggering current of 30 mA 

maximum, and only use an extension cord which is 

intended for outdoor use and equipped with a 

splashproof coupling-socket

AFTER USE

•  When you put away the tool, switch off the motor and 

ensure that all moving parts have come to a complete 

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

•  Do not connect the blue (= neutral) or brown (= live) wire 

in the cord of this tool to the earth terminal of the plug

•  If for any reason the old plug is cut off the cord of this tool, 

it must be disposed of safely and not left unattended

USE

•  On/off 

4

•  Switch locking for continuous use 

5

•  Changing saw blades 

6

!  insert blade to full depth with teeth facing forward 

7

•  Sawing at 15°/30°/45° 

8

•  Adjusting sawing speed to material used 

9

 (

4281

)

!  if the tool does not run with wheel C in position 1, 

select a higher sawing speed and lower the 

sawing speed while the tool runs

•  Dust suction 

0

a

!  do not use vacuum cleaner when cutting metal

•  Dust blowing 

0

b

•  Operating the tool

-  before switching on the tool, ensure that front end of 

footplate rests flat on the workpiece

-  hold tool firmly with both hands, so you will have full 

control of the tool at all times

!  while working, always hold the tool at the 

grey-coloured grip area(s) 

!

-  ensure that complete surface of footplate rests firmly 

on the workpiece

!  ensure that the blade has come to a complete 

standstill, before you lift the tool from the 

workpiece

-  keep ventilation slots D 

2

 uncovered

•  Cable clip 

@