Bosch GST 700 - Инструкция по эксплуатации - Страница 15

English | 

15

Parallel guide with circle cutter (accessory)

When working with the parallel guide with circle cutter 

(20)

(accessory), the workpiece must be no more than 30 mm
thick.
Parallel cuts (see figure 

F

): Loosen the locking screw 

(19)

and slide the scale on the parallel guide through the guide

(18)

 in the base plate. Adjust the desired cutting width as a

scale value on the inside edge of the base plate. Retighten
the locking screw 

(19)

.

Circular cuts (see figure 

G

): Drill a hole large enough to push

the saw blade through on the cutting line within the circle to
be cut. Machine the drill hole with a router or file so that the
saw blade can lie flush with the cutting line.
Position the locking screw 

(19)

 on the other side of the par-

allel guide. Slide the scale on the parallel guide through the
guide 

(18)

 into the base plate. Drill a hole in the workpiece

in the middle of the section to be cut out. Insert the centring
tip 

(21)

 through the inner opening of the parallel guide and

into the drilled hole. Adjust the radius as a scale value on the
inside edge of the base plate. Retighten the locking screw

(19)

.

Coolant/lubricant

As the material heats up along the cutting line when cutting
metal, you should apply coolant or lubricant.

Maintenance and Service

Maintenance and Cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by 

Bosch

 or by an

after-sales service centre that is authorised to repair 

Bosch

power tools.
Clean the saw blade receptacle regularly. For this, remove
the saw blade from the power tool and lightly tap out the
power tool on a level surface.
If the power tool becomes very dirty, this can lead to serious
faults. For this reason, do not cut materials which generate
large quantities of dust from below or overhead.

u

In extreme conditions, always use a dust extractor if
possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD) upstream.

 When

machining metals, conductive dust can settle inside the
power tool, which can affect its protective insulation.

If the dust outlet becomes blocked, switch off the power
tool, disconnect the dust extraction system and remove the
dust and chips.
Apply a drop of oil to the guide roller 

(10)

 from time to time.

Check the guide roller 

(10)

 regularly. If worn, it must be re-

placed through an authorised 

Bosch

 after-sales service

centre.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools 
Locked Bag 66 
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au
www.bosch-pt.co.nz

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 
Tel. Service: (01) 4666700 
Fax: (01) 4666888

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre 
Johannesburg 
Tel.: (011) 4939375 
Fax: (011) 4930126 
E-Mail: bsctools@icon.co.za

Bosch Power Tools

 1 609 92A 5B4 | (10.07.2019)