Bort BPS-570U-Q - Инструкция по эксплуатации - Страница 6

Jig saw

INTENDED USE

This tool is intended for making cut-throughs and cut-outs 
in wood, plastic, metal, ceramic plates and rubber, and is 
suitable for straight and curved cuts at 0° or 45°.

TECHNICAL SPECIFICATIONS 

 1 

PRODUCT ELEMENTS 

 2 

1. Switch for on/off
2. Button for switch locking
3. Wheel for adjusting sawing speed
4. Lever for selecting sawing mode

SAFETY

WARNING!  Read all instructions. Failure to follow all in-
structions listed below may result in electric shock, 

fi

 re 

and/or serious injury. 

•  Always keep the cord away from moving parts of the 
tool
•  If the cord is damaged or cut through while working, do 
not touch the cord, but immediately disconnect the plug
•  Never use tool when cord is damaged; have it replaced 
by a quali

fi

 ed person

•  Do not cut material containing asbestos
•  Do not use a saw blade which is cracked, deformed or 
dull
•  Keep hands away from the saw blade while the tool is 
in use
•  Remove all obstacles on top of as well as underneath 
the cutting path before you start cutting
•  Always disconnect plug from power source before 
making any adjustment or changing any accessory

•  Wear a dust protection mask when working with 
materials which produce dust that is detrimental to 
health; inform yourself beforehand about the materi-
als to be worked on

•  Wear protective goggles when working with materials 
which produce chips
•  Avoid damage that can be caused by screws, nails and 
other elements in your workpiece; remove them before 
you start cutting
•  Check the functioning of the tool before each use and, 
in case of a defect, have it repaired immediately by a 
quali

fi

 ed person; never open the tool yourself

•  Always check that the supply voltage is the same as 
the voltage indicated on the nameplate of the tool (tools 
with a rating of 230V or 240V can also be connected to a 
220V supply)
•  When used outdoors, connect the tool via a fault cur-
rent (FI) circuit breaker with a triggering current of 30 mA 
maximum, and only use an extension cord which is in-
tended for outdoor use and equipped with a splash-proof 
coupling-socket

•  The noise level when working can exceed 85 dB(A); 
wear ear protection
•  When you put away the tool, switch off the motor and 
ensure that all moving parts have come to a complete 
standstill
•  SBM Group can assure 

fl

 awless functioning of the tool 

only when original accessories are used
•  Use completely unrolled and safe extension cords with 
a capacity of 16Amps (U.K. 13 Amps)
•  In case of electrical or mechanical malfunction, imme-
diately switch off the tool and disconnect the plug
•  This tool should not be used by people under the age 
of 16 years
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
•  Do not connect the blue (= neutral) or brown (= live) 
wire in the cord of this tool to the earth terminal of the 
plug
•  If for any reason the old plug is cut off the cord of this 
tool, it must be disposed of safely and not left unattended

Your machine is double insulated in  

 accordance with  EN 50144; therefore no  

earthwire is required.

MAINTENANCE

 Make sure that the machine is not live when    
carrying out maintenance work on the motor. 

Regularly clean the machine housing with a soft cloth, 
preferably after each use. Keep the ventilation slots free 
from dust and dirt.If the dirt does not come off use a soft 
cloth moistened with soapy water. Never use solvents 
such as petrol, alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.
Lubricate the saw blade guide regularly.
Should a fault occur, e.g. after wear of a part, please con-
tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of the 
packaging materials can be recycled. Take these materi-
als to the appropriate recycling locations. Take your un-
wanted machines to your local SBM Group dealer. Here 
they will be disposed of in an environmentally safe way.

6

English