Квадроциклы Can Am DS 70 2011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
MAINTENANCE PROCEDURES
Spark Plug Removal
Disconnect spark plug cable from
spark plug.
vmo2008-008-034_a
1. Spark plug cable
Unscrew spark plug one turn.
vmo2008-008-035_a
1. Spark plug
If possible, clean spark plug and cylin-
der head with pressurized air.
CAUTION Always wear safety
goggles when using pressurized air.
Unscrew and remove spark plug com-
pletely.
Spark Plug Installation
Prior to installation, make sure the con-
tact surface of the cylinder head and
spark plug is free of grime.
Using a feeler gauge, set the spark
plug gap between 0.7 mm to 0.8 mm
(.028 in to .031 in).
Apply anti-seize lubricant over spark
plug threads to prevent a possible
seizure.
Screw spark plug into cylinder head by
hand and tighten with a torque wrench
and proper socket.
Torque
spark
plug
to
11.0 N•m ± 1.1 N•m
(97 lbf•
in
± 10 lbf•
in
).
Battery
To access the battery, remove the seat.
Battery Maintenance
CAUTION Never charge a bat-
tery while installed in vehicle.
NOTICE
Never remove the battery
sealing cap.
These vehicles are equipped with a
VRLA battery (Valve Regulated Lead
Acid). It is a maintenance-free type
battery, there is no need to add water
to adjust electrolyte level.
Clean battery post with a wire brush.
Apply dielectric grease on post to pro-
tect against oxidation.
Battery Inspection
Inspect battery connections for tight-
ness and cleanliness.
Inspect battery support.
94
______________
