Ryobi RP750450 - Инструкция по эксплуатации - Страница 4

English

2

of battery pack may create a risk of fire when used with 
another battery pack.

■

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

■

When battery pack is not in use, keep it away from 
other metal objects like paper clips, coins, keys, 
nails, screws, or other small metal objects that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause 
burns or a fire.

■

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact.

 If contact accidentally 

occurs, flush with plenty of soap and water. If liquid 
contacts eyes, immediately seek medical help. Liquid 
ejected from the battery may cause irritation or burns.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

This will ensure that the safety of the power tool is 
maintained.

SPECIFIC SAFETY RULES

■

Keep all parts of the body away from the cutter 
blade. Do not remove cut material or hold material 
to be cut when blades are moving. Make sure the 
switch is off when clearing jammed material.

 A 

moment of inattention while operating power tools may 
result in serious personal injury.

■

Carry the hedge trimmer by the handle with the 
cutter blade stopped.

 When transporting or storing 

the hedge trimmer, always fit the cutting device cover. 
Proper handling of the hedge trimmer will reduce 
possible personal injury from the cutter blades.

■

Hold the power tool by insulated gripping surfaces only, 
because the cutter blade may contact hidden wiring or 
its own cord. Cutter blades contacting a “live” wire may 
make exposed metal parts of the power tool “live” and 
could give the operator an electric shock.

■

Keep cable away from cutting area.

 During operation 

the cable may be hidden in shrubs and can be 
accidentally cut by blades.

■

Thoroughly inspect the area where the machine is 
to be used and remove all rocks, sticks, metal, wire, 
bones, toys, or other foreign objects.

INTENDED USE

■

This product is designed for home or domestic use. It 
is intended to cut and trim hedges, shrubs and similar 
vegetation.

■

It should be used in dry, well illuminated conditions.

■

It is NOT intended to cut grass, trees or branches. It 
should not be used for any other purpose than hedge 
trimming.

ADDITIONAL SAFETY RULES

PREPARATION

■

Clear the area to be cut before each use.

 Remove all 

objects such as cords, lights, wire, or string which can 
become entangled in the cutting blade.

■

Clear the area of children, bystanders and pets.

At a minimum, keep all children, bystanders and 
pets outside a 15m radius; there still may be a risk to 
bystanders from thrown objects. If you are approached, 
stop the unit immediately.

■

Do not operate in poor lighting.

 Use the unit only in 

daylight or good artificial light.

■

Inspect the unit before use.

 Replace any damaged 

parts. Check for battery pack leaks.

■

Make sure all fasteners and guards are in place 
and secure.

 Replace cutting blades or any other parts 

that are cracked, chipped, or damaged. Make sure 
the cutting blade is properly installed and securely 
fastened. Failure to do so can result in personal injury 
to the operator and bystanders, as well as damage to 
the unit.

■

Never attempt to use an incomplete machine or one 
fitted with an unauthorised modification.

 If any parts 

are missing, do not operate the unit until the missing 
parts are replaced.

OPERATION

■

Do not use trimmer without front handle in place.

Keep both hands on handles when unit is in use.

■

Before starting the unit, make sure the cutting 
blades will not come in contact with anything.

■

Keep unit clean of hedge clippings and other 
materials. 

They may become lodged in the cutting 

blades.

■

If the machine strikes or becomes entangled with 
foreign objects, stop the unit immediately, remove the 
battery pack and check for damage. Do not operate the 
unit with loose or damaged parts.

■

Always be aware of your surroundings and stay 
alert for possible hazards that you may not hear 
due to the noise of the machine.

■

The vibration level during actual use of the power tool 
can differ from the declared total value depending 
on the ways in which the tool is used. Identify safety 
measures to protect yourself based on an estimation of 
exposure in the actual conditions of use, taking account 
of all parts of the operating cycle such as the times 
when the tool is switched off and when it is running idle 
in addition to the trigger time.

■

It has been reported that vibrations from hand-held 
tools may contribute to a condition called Raynaud’s 
Syndrome in certain individuals. Symptoms may 
include tingling, numbness and blanching of the fingers, 
usually apparent upon exposure to cold. Hereditary 
factors, exposure to cold and dampness, diet, smoking 
and work practices are all thought to contribute to 
the development of these symptoms. It is presently 
unknown what, if any, vibrations or extent of exposure 
may contribute to the condition. There are measures 
that can be taken by the operator to possibly reduce the 
effects of vibration:
a.  Keep your body warm in cold weather. When 

operating the unit wear gloves to keep the hands