Einhell GC-HH 9048 - Инструкция по эксплуатации - Страница 20

GB

- 20 -

7. Replacing the power cable

Danger!

If the power cable for this equipment is damaged, 

it must be replaced by the manufacturer or its 

after-sales service or similarly trained personnel 

to avoid danger.

8. Cleaning, maintenance and

ordering of spare parts

Danger!

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

•

 We recommend that you clean the device

immediately each time you have finished 

using it.

•

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

8.2 Carbon brushes

In case of excessive sparking, have the carbon  

brushes checked only by a quali

fi

 ed electrician.

Danger!

 The carbon brushes should not be rep 

laced by anyone but a quali

fi

 ed electrician.

8.3 Maintenance

•

The blades should be cleaned and lubricated 

at regular intervals to ensure best perfor-

mance at all times. Remove deposits with a 

brush and apply a thin film of oil (see Figure 

11).

•

There are no other parts inside the equipment 

which require maintenance.

8.4 Ordering replacement parts:

Please quote the following data when ordering 

replacement parts:

•

 Type of machine

•

 Article number of the machine

•

 Identification number of the machine

•

 Replacement part number of the part required

For our latest prices and information please go to 

www.isc-gmbh.info

9. Faults

If the equipment does not work:

Check that the power cable is connected properly 

and check the electricity fuses/circuit breakers. If 

the equipment will not work in spite of the supply 

voltage being OK, please send it to the customer 

service address provided.

10. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

11. Storage

Store the equipment and accessories in a dark 

and dry place at above freezing temperature. 

The ideal storage temperature is between 5 and 

30 °C. Store the electric tool in its original pa-

ckaging.

Anl_GC_HH_9048_SPK7.indb   20

05.07.2017   07:20:00

05.07.2017   07:20:00