Einhell GC-HH 9048 - Инструкция по эксплуатации - Страница 17

GB

- 17 -

3. Proper use

Important! This electric hedge trimmer is suitable 

for cutting hedges, bushes and shrubs.

Important! Never use the hedge trimmer to cut 

grass.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

4. Technical data

Rated voltage  ......................... 230-240 V ~ 50 Hz
Power input  ..............................................  900 W
Cutting length  ......................................... 410 mm
Cutter rail length  ..................................... 480 mm
Tooth spacing  ........................................... 20 mm
Cuts/min .....................................................  2000
Max. cutting thickness  .............................. 15 mm
Sound pressure level L

pA

:  ................  87.98 dB(A)

K

pA

 uncertainty  .......................................  3 dB(A)

L

WA

 sound power level........................97.86 dB(A)

K

WA

 uncertainty .......................................  3 dB(A)

Guaranteed L

WA

 sound power  ..............................

level...........................  .......................... 105 dB(A)
Hand-arm vibration
at the front handle a

hv

  ...........................

≤

 2.5 m/s

2

Hand-arm vibration
at the rear handle a

hv

  ............................

≤

 2.5 m/s

2

K uncertainty:  ..........................................1.5 m/s

2

Weight  ..........................................  approx. 5.3 kg

The noise emitted by the hedge trimmer may 

exceed 85 dB (A). The operator will require noise 

protection measures if this is the case. The noise 

emitted by the hedge trimmer was measured in 

accordance with EN 60745-1. The vibration emis-

sion level at the handle was determined in compli-

ance with EN 60745-1.

The vibration emission level has been measured 

in accordance with a set of standardized criteria 

and can be used to compare one power tool with 

another.

The speci

fi

 ed emission level can also be used 

to make an initial assessment of the exposure to 

vibration.

Caution!

Depending on how you use the product, the 

actual vibration emissions can vary from the va-

lues listed above. Take appropriate measures to 

protect yourself against vibration stress. Take the 

entire work sequence into consideration including 

times at which the product is not working under 

load or is switched o

ff

 . Appropriate measures 

include among other things regular care and 

maintenance of the product and tool attachments, 

keeping your hands warm, taking regular breaks 

and good work sequence planning.

Keep the noise emissions and vibrations to a 

minimum.

•

 Only use appliances which are in perfect wor-

king order.

•

 Service and clean the appliance regularly.

•

 Adapt your working style to suit the appliance.

•

 Do not overload the appliance.

•

 Have the appliance serviced whenever ne-

cessary.

•

 Switch the appliance off when it is not in use.

•

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1. Lung damage if no suitable protective dust 

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

Anl_GC_HH_9048_SPK7.indb   17

Anl_GC_HH_9048_SPK7.indb   17

05.07.2017   07:20:00

05.07.2017   07:20:00