Einhell GC-EH 5747 - Инструкция по эксплуатации - Страница 14

GB

- 14 -

8. Cleaning, maintenance and

ordering of spare parts

Danger!

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

•

 We recommend that you clean the device

immediately each time you have finished 

using it.

•

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

8.2 Maintenance

•

 The cutters should be cleaned and lubricated 

at regular intervals in order to ensure best 

performance at all times. Remove deposits 

with a brush and apply a thin film of oil (see 

Figure 10).

•

There are no parts inside the equipment 

which require additional maintenance.

8.3 Ordering replacement parts:

Please quote the following data when ordering 

replacement parts:

•

 Type of machine

•

 Article number of the machine

•

 Identification number of the machine

•

 Replacement part number of the part required

For our latest prices and information please go to 

www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

10. Storage

Store the equipment and accessories in a dark 

and dry place at above freezing temperature. The 

ideal storage temperature is between 5 and 30 

°C. Store the electric tool in its original packaging.

11. Faults

The machine does not start: 

Check that the power cable is correctly connec-

ted and check the mains fuses. If the machine 

still does not work even with connected voltage, 

please send it to the speci

fi

 ed customer services 

address.

Anl_GC_EH_5747_SPK7.indb   14

Anl_GC_EH_5747_SPK7.indb   14

18.07.2016   16:52:52

18.07.2016   16:52:52