Einhell GC-EH 5747 - Инструкция по эксплуатации - Страница 13

GB

- 13 -

4. Technical data

Voltage .............................................230V ~ 50Hz
Power consumption ................................... 570 W
Cutting length.......................................... 465 mm
Cutter rail length ...................................... 530 mm
Tooth spacing ........................................... 18 mm
max. cutting ø  ........................................... 14 mm
Cuts/min ................................................3200/min
Sound pressure level L

pA

 ............................. 76  dB

Sound power level L

WA

 ................................. 97  dB

K uncertainty ........................................... 3 dB (A)
Vibration a

hv

 ..........................................

≤

 2.5 m/s

2

K uncertainty ............................................1.5 m/s

2

Weight.........................................................3.1 kg

Important!

The vibration value changes according to the 

area of application of the electric tool and may 

exceed the  speci

fi

 ed  value in exceptional cir-

cumstances.

Keep the noise emissions and vibrations to a 

minimum.

•

 Only use appliances which are in perfect wor-

king order.

•

 Service and clean the appliance regularly.

•

 Adapt your working style to suit the appliance.

•

 Do not overload the appliance.

•

 Have the appliance serviced whenever ne-

cessary.

•

 Switch the appliance off when it is not in use.

•

 Wear protective gloves.

5. Before starting the equipment

Before you connect the equipment to the mains 

supply make sure that the data on the rating plate 

are identical to the mains data.

Warning! 

Always pull the power plug before making 

adjustments to the equipment.

Assembly of the steady grip

Push the steady grip (Fig. 3/Item 3) in the direc-

tion of the arrow onto the motor housing (Fig. 3) 

and secure (Fig. 4) on both sides with 2 screws 

(Fig. 4/Item 8).

6. Operation

The hedge trimmer is equipped with a two-

handed safety switch. The machine works only 

when the switch on the steady grip (Fig. 5/Item A) 

is pressed with one hand and the switch on the 

handle (Fig. 5/Item B) is pressed with the other 

hand.

Releasing any of the switches will bring the hedge 

trimmer to a stop.

In so doing, please check the running of the 

blades.

•

 Please check that the blades function cor-

rectly. The blades cut on both sides and run 

in opposite directions to each other, for gua-

ranteed high cutting performance and quiet 

operation.

•

 Fasten the extension cable to the cable hol-

der before starting to use the machine (see 

Fig. 5).

•

 For use in the open air you must only use

extension cables certified for the purpose.

Tips on use

•

 The hedge trimmer can be used not only for 

trimming hedges but for trimming shrubs and 

bushes as well.

•

 For optimum trimming performance, guide the 

blade teeth at an angle of approx. 15° to the 

hedge (see Fig. 6).

•

 Since the blades cut on both sides and run 

in opposite directions to each other, you can 

trim in both directions (see Fig. 7).

•

 To achieve a hedge with a uniform height 

it is recommended that you stretch a piece 

of string along the edge of the hedge for 

guidance. Then simply cut away all twigs pro-

jecting above the line (see Fig. 8).

•

 The sides of the hedge should be trimmed 

with arc-type movements from below upwards 

(see Fig. 9).

7. Replacing the power cable

Danger!

If the power cable for this equipment is damaged, 

it must be replaced by the manufacturer or its 

after-sales service or similarly trained personnel 

to avoid danger.

Anl_GC_EH_5747_SPK7.indb   13

Anl_GC_EH_5747_SPK7.indb   13

18.07.2016   16:52:52

18.07.2016   16:52:52