Timberk AC TIM 48LC DT5-K - Инструкция по эксплуатации - Страница 8

www.timberk.com • Electric air conditioner

8

ATTENTION! 

Maintenance and service air conditioner must carry out 

specialist.

8. MAINTENANCE

Before cleaning switch the conditioner off.
Cleaning of the indoor unit and remote control board:
Indoor unit and remote control board should be cleaned with a dry soft 

cloth.
 If the indoor unit is too unclean, moisten the cloth with cold water.
 It is prohibited to clean the remote control board with moist cloth.
 In order to avoid the damage of paint or details of the conditioner, do not 

clean it with brushes and do not leave them on the surface of indoor unit.
In order to avoid the damage of surface or deformation of the conditioner 

details, do not clean it with petrol, solvents, cleaning powders or other 

chemically active substances.
Before a sustained interruption in the conditioner work:
 Turn the conditioner on for several hours in the FAN mode. It will allow you 

to dry its inner cavities
Switch the conditioner off.
Remove the batteries from the remote control board.
Checks before starting:
Make sure that air inlet and return air grillages of the outdoor unit are not 

blocked by foreign objects.

DRY

Turn the conditioner on pressing the «ON/OFF» button. 

Pressing the «MODE» button, select the DRY mode. The conditioner will 

start working

in the set mode. To turn the conditioner off, press the «ON/OFF» button

once again.

TIMER mode

Procedure of timing:

If the conditioner is off, then press the “TIMER” button to activate the

automatic turning on. Pressing this button once again, set the time for

turning the conditioner on in the set time interval. To cancel the timer mode,

press the “TIMER” button once again.

If the conditioner is working, then press the “TIMER” button to activate

the automatic turning off. Pressing this button once again, set the time for

turning the conditioner off in the set time interval. To cancel the timer mode,

press the “TIMER” button once again.

«SLEEP» mode

Using this button, you may turn the sleep mode on and off. In this mode the

fan rotation speed will be low.

When the function «SLEEP», if the air conditioner operates in cooling mode,

set temperature will increase1°C in 2 hours and 2°C over 5 hours. When 

the

function «SLEEP», if the air conditioner operates in heating mode, the set

temperature will decrease 2°C in 1 hour and another 4°C within 2 hours of

work. After 7 hours in SLEEP mode air conditioner turns off.