Timberk AC TIM 18HDN S8ML - Инструкция по эксплуатации - Страница 9

www.timberk.com • Electric air conditioner

9

8. MAINTENANCE

• 

Before cleaning unplug the conditioner.

• 

Cleaning of the indoor unit and remote control board:

• 

Indoor unit and remote control board should be cleaned with a dry soft 

cloth.

• 

If the indoor unit is too unclean, moisten the cloth with cold water.

• 

It  is prohibited to clean the remote control board with moist cloth.

• 

In order to avoid the damage of paint or details of the conditioner, do not 

clean it with brushes and do not leave them on the surface of indoor unit.

• 

In order to avoid the damage of surface or deformation of the conditioner 

details, do not clean it with petrol, solvents, cleaning powders or other 

chemically active substances.

• 

Before a sustained interruption in the conditioner work:

• 

Turn the conditioner on for several hours in the FAN mode. It will allow 

you to dry its inner cavities

• 

Unplug the conditioner. Remove the batteries from the remote control 

board. 

• 

Checks before starting:

• 

 Make sure that an air filter is installed.

• 

Make sure that air inlet and outlet grilles of the outdoor unit are not 

blocked by foreign objects.

• 

Cleaning of air filter

• 

Air filter cleans the air entering the conditioner from dust and foreign 

particles. If the filter is contaminated, the conditioner capacity decreases 

sharply.

• 

If the conditioner is operated permanently, the filter should be cleaned 

once per two weeks.

• 

If the conditioner is installed in a room with dusty atmosphere, then the 

air filter should be cleaned more often.

• 

To remove the filter, open the indoor unit panel.

• 

Remove air filters. Clean the filter with a vacuum cleaner or rinse it in 

clean water. If the filter is contaminated heavily, clean it with a soft brush 

and wash in diluted washing solution, then dry it in a cool place.

• 

While cleaning the filter with the vacuum cleaner, hold it with contaminated 

surface up. While washing the filter in water, hold it with contaminated 

surface down.

• 

Do not dry the filter in the sun or near a fire.

• 

Set the air filter to initial position and close the panel.

«SLeeP» mode

Button «SLEEP» (Night Care). Using this button, you may turn the sleep 

mode on and off. In this mode, if working for cooling, the conditioner will 

increase temperature by 1 °С an hour  from the specified one within two 

hours. If working for heating, the conditioner will decrease temperature by 

1 °С an hour  from the specified one within two hours. After 10 hours of 

operation the conditioner will turn off automatically.

regulation of treated air flow direction

Regulating the position of deflectors (blinds), set the direction of treated 

air flow ensuring uniform distribution of temperature and the most comfort 

conditions in the room. To change the position of deflectors, use the 

«SWING» button.