Timberk AC TIM 18HDN S19 - Инструкция по эксплуатации - Страница 7

www.timberk.com • Electric air conditioner

7

economic mode on and off. In this mode temperature will increase 

(in cool mode) or decrease (in heat mode) slightly – by 2°С from the 

specified one. 
19.Button «SLEEP» (Night Care). Using this button, you may turn 

the sleep mode on and off. In this mode, if working for cooling, the 

conditioner will increase temperature by 1 °С from the specified one 

within two hours. If working for heating, the conditioner will decrease 

temperature by 1 °С from the specified one within two hours. After 10 

hours of operation the conditioner will turn off automatically.
20.Button for selection of operating mode – «MODE». Using this button, 

you may select a needed operating mode: AUTO, COOL, DRY, HEAT, 

FAN.
Indication of the control board display shall correspond to selected 

modes.
Work with remote control board.
Mounting and replacement of batteries: mount two LR03 alkaline 

batteries, according to polarity indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert 

used batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the 
board or else electrolyte may leak and damage the board.
In normal operation of the conditioner average service life of batteries will 

be about a half-year.
Replace batteries, if command receiving is not confirmed with an audio 

signal, or if the display does not show a sign of command transfer. When 

generating commands from the remote control board, point an IR-

radiator at a remote-control signal receiver situated on the indoor unit. 

Hold the remote control board at the distance of no more than 8 m from 

the indoor unit. The remote control board will not work, if there are any 

curtains, doors or other things between it and the indoor unit. Protect 

the board from water and exposure to direct sunlight and heat sources.

12

13

14

17

15

20

16
19

18

Description of remote control board

12.Button «ON/OFF» (Power). Using this button, you may turn the 

conditioner on or off.
13.Buttons «TEMP» (increase/decrease). Using this button, you may set 

needed air temperature indoors.
14.Button «FAN». Using this button, you may select rotation speed of 

the indoor unit fan: «Auto», «High», «Middle», «Low».
In “Auto” mode the fan speed will change automatically. In dry mode the 

fan speed will remain unchanged – “Low”.
15.Button «SWING». Using this button, you may regulate position of air-

outlet blinds and forward treated air up and down.
16.Button «TIMER». Pressing this button, you may set the time for 

turning the conditioner on and off (set the time by pressing “TEMP» 

buttons up and down). If the conditioner is off, you may set the time 

for automatic turning on in a set time interval. And vice versa, if the 

conditioner is on, you may set the time for automatic turning off. Before 

activation of the Timer function you may specify the needed settings.
17.Button «SUPPER». Using this button, you may turn the turbo mode 

on and off. In this mode the conditioner shows the maximum cooling (in 

cool mode) or heating (in heat mode) capacity.
18.Button «ECO» (Economic). Using this button, you may turn the 

Fig. 3