Mitsubishi Electric MSZ-LN25VGB/MUZ-LN25VGHZ 01-211-301-0-501-053 - Инструкция по эксплуатации - Страница 10

En-9

● OPERATING INSTRUCTIONS ●

Airfl ow Control mode offers air conditioning according to a location of 

an occupant in a room detected by i-see Sensor.

1

Press 

 during COOL, DRY, HEAT or AUTO 

mode to activate the AIRFLOW CONTROL mode. This 

mode is only available when the i-see control mode is 

effective.

2

Each press of 

 changes AIRFLOW CONTROL 

in the following order:

 (INDIRECT) : An occupant will be less exposed to 

direct airfl ow.

 (DIRECT)  : Mainly the vicinity of an occupant will 

be air-conditioned.

 (EVEN) 

: The unit learns the area where an 

occupant spend most of the time, 

and evens out the temperature of 

that area.

•  Horizontal and vertical airflow directions will be automatically selected.

•  When  more  than  a  couple  of  people  are  in  a  room,  the  AIRFLOW 

CONTROL mode may work less effectively.

•  If you still feel uncomfortable with the air direction determined by the 

INDIRECT mode, adjust the air direction manually. 

 Page 8 

3

Cancelling the i-see control mode automatically can-

cels the AIRFLOW CONTROL mode.

•  The AIRFLOW CONTROL mode is also cancelled when the VANE or 

WIDE VANE buttons is pressed.

A

IRFLOW  CONTROL  MODE

This  function  automatically  changes  the  operation  to  No  occupancy 

energy-saving mode or No occupancy Auto-OFF mode when nobody 

is in the room.

A

BSENCE DETECTION

1

To activate this No occupancy energy-saving mode, 

press 

 until 

 appears on the operation display of 

the remote controller.

2

To activate this No occupancy Auto-OFF mode, press 

 until 

 appears on the operation display of the 

remote controller.

3

Press 

 again to cancel the ABSENCE DETEC-

TION.

•  Even if the unit is turned OFF due to No occupancy Auto-OFF mode, 

the display of the remote controller remains to indicate the unit is in 
operation. Press 

 then press 

 again to restart opera-

tion.

•  When OFF timer is set, a priority is given to OFF timer.

•  No occupancy energy saving mode or No occupancy Auto-OFF mode 

are not available during POWERFUL operation.

•  The unit will not be turned off if no one is detected during normal 

operation mode, even though No occupancy Auto-OFF mode is acti-

vated.

(INDIRECT)  (DIRECT) 

(EVEN) 

(OFF)

Energy-

saving 

mode

Auto-OFF

mode

No 

occupancy 

detected

Occupancy 

detected

About 

10 min.

Normal

Normal

Normal

About 1 HR.

Saving energy

Saving more

Turn OFF

Saving energy

Cancel

JG79Y181H01_en.indd   9

2016/10/26   14:15:58