D-Link DGS-1024D/I1A - Инструкция по эксплуатации - Страница 2

2

E

N

G

LI

S

H

Notice Before Setup the DGS-1016D / DGS-1024D

The setup of the Switch can be performed using the following steps:

A.

 Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical 

Specifications for the acceptable operation temperature and humidity ranges.

B.

 Install the Switch in a site free from strong electromagnetic source, vibration, dust, and 

direct sunlight.

C.

 Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.

D.

 Visually inspect the power cable and ensure that it is firmly inserted into a suitable power 

outlet.

Installation

Desktop or Shelf Installation

Rack Installation

When installing the Switch on a desktop 

or shelf, the rubber feet included with 

the device must be first attached. Attach 

these cushioning feet on the bottom at 

each corner of the device. Allow enough 

ventilation space between the device 

and the objects around it.

The Switch can be mounted in an EIA standard size, 

19-inch rack, which can be placed in a wiring closet 

with other equipment. To install, attach the mounting 

brackets on the switch’s front panel (one on each side) 

and secure them with the screws provided.

Then, use the screws provided with the equipment 

rack to mount the Switch in the rack.

DGS-1016D / 

DGS-1024D

Quick Installation 

Guide

Power Cord

Rack-mount bracket

These are the items included with your DGS-1016D / DGS-1024D purchase:

Check Your Package Contents

Quick Installation Guide

DGS-1016D / DGS-1024D

 16 / 24-Port Gigabit Desktop Switch