Philips HD8427 Saeco Poemia - Инструкция по эксплуатации - Страница 11

• 11 •

English

• 

(Fig.24) -

 Close the knob (3) by turning it clockwise.

•  Remove the hot water container. 

8 STEAM 

/ 

CAPPUCCINO

Danger  of  burns!  Dispensing  may  be  preceded 
by small jets of hot water. The steam wand may 

reach high temperatures: never touch it with bare 
hands.

Warning!  Never  brew  cof fee  when  the  steam 
function is on, as the temperature is too high 

and there is a risk of burns.

Warning!  During coff ee brewing, do not remove 
the f ilter ho lder (i f ins er te d) by manuall y 

turning it clockwise. Danger of burns! The fi lter holder 
can only be disconnected after bringing the selection 
k nob  (17)  bac k  to  the  " " position and cooling the 
machine down as described in section 4.5.

•  During this operation, the "machine ready" light (20) may 

fl ash; this is to be considered as a standard and not a faulty 
operating mode. 

•  Before using the machine, make sure that the hot water/

steam knob (3) is closed and that there is enough water in 
the machine tank.

•  Press the ON/OFF button (11); the light (18) will turn on to 

indicate that the machine is on.

•  Wait until the "machine ready" light (20) turns on.
• 

(Fig.25) - 

Set the selection knob (17) to the "

" position. 

The light (20) turns off .

•  Wait until the light (19) turns on. The machine is now ready 

for steam dispensing.

• 

(Fig.26) - 

Place a container under the steam wand.

• 

(Fig.26) -

 Open the knob (3) for a few seconds, so that re-

maining water fl ows out of the steam wand (Pannarello). 
In a short time only steam will come out. 

•

 (Fig.27) 

-

 Close the knob (3) and remove the container.

•  Fill 1/3 of the container - the one you wish to use to prepare 

the cappuccino - with cold milk.

Use cold milk to get a better result.

• 

(Fig.28) - 

Immerse the steam wand in the milk and open 

the knob (3) by turning it counter-clockwise. Turn the milk 
container with slow upward movements so that it warms 
up evenly.

It is recommended that the dispensing process 
lasts max. 60 seconds.

•  Once fi nished, close the knob (3) by turning it clockwise 

and remove the cup with frothed milk.

• 

(Fig.30) - 

Set the selection knob (17) to the " " position. 

If both "

" and "

" lights are on, the temperature of 

the machine is too high for brewing coff ee.

•  Prime the circuit as described in section 4.5 to make the 

machine ready for use.

Note: the machine is ready when the 

 "ma-

chine ready" light is steady on.

Important note: if it is not possible to brew a 
cappuccino as described, prime the circuit as 

explained in section 4.5 and then repeat the steps.

The same procedure can be used to heat other 
beverages.

•  After this operation, clean the steam wand with a wet 

cloth.

9 ENERGY 

SAVING

The machine is designed for energy saving. The machine auto-
matically turns off  after 9 minutes of inactivity. 

To restart the machine just press the ON/OFF button (11); the 
"machine on" light (18) turns on. 

Wait until the "machine ready" light (20) turns on.

10 CLEANING

Maintenance and cleaning can only be carried out when the 
machine is cold and disconnected from the electric network. 
•  Do not immerse the machine in water or place any of its 

parts in a dishwasher. 

•  Do not use spirit, solvents and/or aggressive chemical 

agents.

•  We recommend cleaning the water tank and refi lling it 

with fresh water every day. 

• 

(Fig.31-33) - 

Every day, after heating milk, remove the ex-

ternal part of the Pannarello and wash it with fresh drink-
ing water.

• 

(Fig.31-32-33) - 

Clean the steam wand weekly. In order to 

do this, perform the following operations:

-  remove the external part of the Pannarello (for standard 

cleaning);

-  remove the upper part of the Pannarello from the steam 

wand;

-  wash the upper part of the Pannarello with fresh drinking 

water;