Krups EA816031 - Инструкция по эксплуатации - Страница 30

28

SETTINGS

All of the following options allow you to run the selected programs:

SETTINGS

You can set your water hardness between 0 and 4 by  
pressing the + or – buttons 

. See “Measuring water 

hardness” (below) 

You can program automatic rinsing each time the appliance is 
turned on by pressing the 

 buttons and selecting ON.

You can choose the period after which your appliance will turn off 
automatically (between 15 and 120 minutes by pressing the    

 buttons).

You can adjust the temperature of your coffee to three different 
levels by pressing the 

 buttons.

Return to coffee types menu.

Measuring water hardness

It is advisable to adjust the appliance according to the hardness of the water used. To check the water hardness, use 
the stick supplied with your machine or contact your local water authority.

Degree of 

hardness

Class 0

Very soft

Class 1

Soft

Class 2

Average hardness

Class 3

Hard

Class 4

Very hard

° dH

< 3°

> 4°

> 7°

> 14°

> 21°

° e

< 3,75°

> 5°

> 8,75°

> 17,5°

> 26,25°

° f

< 5,4°

> 7,2°

> 12,6°

> 25,2°

> 37,8°

Appliance  

settings

0

1

2

3

4

Installing the filter (Claris - Aqua Filter System cartridge) (32)
Note : 

To correctly install your cartridge, ensure that you follow the installation procedure each time you replace it.

(33) A mechanism which memorises the month in which the cartridge was changed and replaced (after a maximum 
of 2 months): set the date using the cartridge cursor. Fit the cartridge in the tank (34). In the maintenance and settings 
menu   , the function indicator    is located above the maintenance button  . Using the navigation button   , 
select the filter cartridge installation symbol  . The    symbols and the start button   start to flash.
Place a 0.6 L container under the steam nozzle.
Press start  . The start-up cycle begins and finished when the coffee types menu appears