Кофеварка Krups EA816031 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

22
TABLE OF MEANINGS OF KEYS AND BUTTONS
2
TABLE OF MEANINGS OF KEYS AND BUTTONS
Buttons and knobs
“On-off” button
Navigation button (cursor key)
Favourite coffee type button
or press
Save favourite button
or press and hold
To adjust selected settings
Steam drink button
Start or stop equipment
Maintenance and settings button
To adjust how finely ground you would
like the coffee beans.
Symbols
Constant
Flashing
Meaning
The coffee grounds collector is missing or improperly positioned
Refill the water tank
The water tank is not properly in place
Place a container (0.6 L minimum) under the steam and coffee jets
Maintenance cycle in progress
Malfunction: unplug the machine for ten seconds then plug it back in
Install filter cartridge
Rinsing cycle in progress
Clean machine with KRUPS cleaning tablet
Cleaning cycle interrupted
Descale machine with KRUPS descaling sachet
Descaling cycle interrupted
Adjust the water hardness
Enable automatic rinsing of the coffee circuit when the machine starts.
Program the length of time after which your machine switches off
automatically (standby)
Adjust the coffee temperature/Pre-heating indicator
Favourite A or B - 2 drinks can be saved in memory
Registering favourite A or B
Preparation progress indicator
Press the START-STOP button
Coffee strength indicator
Volume or time indicator
Number of cups (1 or 2)
Active use indicator
Maintenance or settings selection
Empty the coffee grounds collector + empty the drip tray
Содержание
- 85 СПИСОК ОБОЗНАЧЕНИЙ КНОПОК ФУНКЦИЙ
- 87 ПРИГОТОВЛЕНИЕ ОДНОГО ЭСПРЕССО И ОДНОГО КОФЕ
- 88 ВНИМАНИЕ! ОСТАНОВКА ЦИКЛА НЕ ПРОИСХОДИТ МГНОВЕННО.; ОБСЛУЖИВАНИЕ УСТРОЙСТВА
- 90 Программа удаления накипи — длительность: около 20 минут; ДРУГИЕ ФУНКЦИИ
- 91 РАБОТА ПО УХОДУ; РАБ; ВЫКЛЮЧЕНИЕ; ТР
- 93 НЕИСПРАВНОСТИ И ДЕЙСТВИЯ ПО ИХ УСТРАНЕНИЮ
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)