VITEK VT-1512 - Инструкция по эксплуатации - Страница 4

Кофеварка VITEK VT-1512 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 32
Загружаем инструкцию
background image

4

ENGLISH

 •

Do not use the coffee maker if the power cord 
or plug is damaged, if the unit malfunctions or 
after the unit was damaged.

 •

If  the  power  cord  is  damaged,  it  should  be 
replaced by the manufacturer, a maintenance 
service or similar qualified personnel to avoid 
danger.

 •

Do not repair the unit by yourself. Do not dis-
assemble  the  unit  by  yourself,  if  any  mal-
function  is  detected  or  after  it  was  dropped, 
unplug  the  unit  and  apply  to  any  authorized 
service  center  from  the  contact  address  list 
given  in  the  warranty  certificate  and  on  the 
website www.vitek.ru.

 •

Transport  the  unit  in  the  original  packag-
ing only.

 •

Keep  the  unit  out  of  reach  of  children  and 
people with disabilities.

THE UNIT IS INTENDED FOR HOUSEHOLD USE 
ONLY,  ITS  COMMERCIAL  USAGE  AND  USAGE 
IN  PRODUCTION  AREAS  AND  WORK  SPACES 
IS PROHIBITED.

BEFORE THE FIRST USE

After  the  unit  transportation  or  storage  at 
low  temperature  keep  it  for  at  least  three 
hours  at  room  temperature  before  switch-
ing on.
–  Take the coffee maker out of the package and 

remove the packaging materials.

–  Check  the  unit  for  damages;  do  not  use  it  in 

case of damages.

–  Make  sure  that  operating  voltage  of  the  cof-

fee maker corresponds to the voltage of your 
mains.

–  The unit is intended for operation with AC sys-

tem and 50 or 60 Hz frequency. The unit does 
not need any additional settings for operating 
with the required nominal frequency.

BEFORE USING THE UNIT

 •

Make sure that the operation mode switch (5) 
is set to the position «

OFF

».

 •

Before  using  the  coffee  maker  for  the  first 
time,  wash  all  removable  parts  (2,  3,  6)  with 
warm water and neutral detergent, rinse and 
dry them.

 •

Before switching the unit on, make sure that 
the mains voltage corresponds to the voltage 
specified on the unit body.

 •

Unscrew  the  lid  (1)  turning  it  counterclock-
wise.

 •

Pour about 240 ml of water into a cup of suit-
able height. 

 •

Pour  the  water  from  the  cup  into  the  water 
tank. 

 •

Thread the lid (1) rotating it clockwise.

 •

Install the coffee filter (2) into the holder (6), 
do not add ground coffee to the filter (2).

 •

Install  the  filter  holder  (6)  into  the  coffee 
maker.  The  holder  (6)  ledges  should  match 
the  grooves  on  the  boiler  «

»,  after 

that turn the filter holder (6) handle (8) to the 
right until bumping «

».

 •

Place the cup on the tray (11). 

 •

Insert the power plug into the socket.

 •

Switch  the  coffee  maker  on  by  setting  the 
operation  mode  switch  (5)  to  the  position  
«

»,  the  light  indicator  (4)  will  light  up, 

the  heating  element  will  switch  on  and 
water  will  start  pouring  into  the  cup  under 
pressure. 

AT TENTION!
Before setting the switch (5) to the position 
«OFF»  place  a  suitable  bowl  under  the  tip 
(10),  as  during  the  coffee  maker  switching 
off  the  pressure  is  released  and  the  steam 
will be released from the tip (10).

 •

After water pouring set the operation mode 
switch  (5)  to  the  position  «

OFF

»  to  switch 

the  coffee  maker  off  and  to  release  the 
pressure.

 •

To wash the cappuccinator pipe unscrew the 
lid  (1),  fill  a  cup  with  water  (no  more  than 
50 ml),  pour  the  water  to  the  water  tank  and 
screw the lid (1). 

 •

Place a suitable cup under the tip (10).

 •

Switch  the  coffee  maker  on  by  setting  the 
operation  mode  switch  (5)  to  the  position  
«

», the indicator (4) will light up, the heating 

element  will  switch  on  and  the  steam  under 
pressure will be released from the tip (10).

AT TENTION!
Before setting the switch (5) to the position 
«OFF»  place  a  suitable  bowl  under  the  tip 
(10),  as  during  the  coffee  maker  switching 
off  the  pressure  is  released  and  the  steam 
will be released from the tip (10).

 •

Set the operation mode switch (5) to the posi-
tion «

OFF

» to switch the coffee maker off and 

to release the pressure.

 •

The coffee maker is ready to use.

IM VT-1512.indd   4

11/11/19   9:49 AM

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1512?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"