VITEK VT-1508 R - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

Attention! 

Do not detach or install the noz-

zle (6) from/at the steam pipe (5) when it 
is hot, wait until the steam supply pipe (5) 
is cooled down completely (see Pic. 7). You 
can wash the nozzle (6) under the water 
jet.

How to make tea or to warm up bever-
ages

• 

Fill the tank (4) with water and install it 
into the proper position (see Pic. 1)

•

 Install filter (8) (the filter should be free 

from coffee powder) into the holder (9).

•  

Put the cup of the appropriate high on the 
tray (11).

•

  Switch the coffee machine on by press-

ing the button (14), and wait until the indi-
cator (12) is deemed.

•  

Turn the steam supply control handle (3) 
upwards, fill the cup with hot water, and 
afterwards turn the handle (3) into OFF 
position (see Pic. 4). 

•  

You can warm up beverages by steam 
going out of the nozzle (5) using instruc-
tions for making cappuccino coffee. 

Cleaning

•  

Cleaning filter (8): 

-

If the

holes of the filter (8) are blocked 

with coffee powder deposit, you can 
clean it by small brush (see Pic. 8). 

•  

Cleaning the

mesh filter installed in-

side the housing of the coffee ma-
chine

(at the filter 7 holder installa-

tion place):

-

You can remove the coffee

powder rem-

nants out of the filter holes by the tooth-
pick. 

-  Remove the mesh filter if required. Turn 

off the fastening screw (a) by a screw-
driver rotating it anticlockwise, detach 
the mesh filter (b), and clean the filter 
holes by toothpick or needle.

-  Second way: remove mesh filter (b) and 

immerse it into the vinegar or citric acid 
(1/3 tea spoon per one glass of water).

-   Install the mesh filter into the proper po-

sition and fasten the screw (a) (see Pic. 
9).

•  

Cleaning the detachable tray for col-
lecting the drops (11): 

-  When the tray is filled with water com-

pletely, the indicator (10) is lighted. De-
tach the tray (11), remove the grill and 
pour the water out.

-  Wash the grill and the tray with warm wa-

ter.

-   Install the tray into its former position.

Removing the scale

To keep the faultless quality of your coffee 
machine operations (specially, in the areas 
where the water is hard) it is recommend-
ed to remove the scale periodically by the 
citric acid solution (1/3 tea spoon per one 
glass of water).   
Normal water: 

once per 6-8 months

Hard water: 

once per 6 months

Very hard water:  once per 3 months

• Remove the scale from the mesh filter 

installed inside the housing of the coffee 
machine and put it into the former posi-
tion (see description above). 

•  Pour the citric acid solution into the water 

tank (4). 

•  Insert the filter (8) into the holder (9) and 

install it into the appropriate position (see 
Pic. 2).

• Install the appropriate cup on the tray 

(11). 

•  Turn the coffee machine on by the switch-

er (14).

• 

After the coffee machine has been 
warned up turn the steam supply control 
handle (3) upwards, fill the cup and turn 
the control handle (3) into OFF position. 
Pour the liquid out of the cup. Repeat the 
procedure several times.

•  While the last procedure put the cup un-

der the steam pipe (5) to clean it. Turn 
on the steam supply rotating the control 
handle (3) downwards. Afterwards turn 
the control handle (3) into OFF position. 

1508.indd   6

1508.indd   6

15.05.2007   9:57:09

15.05.2007   9:57:09