Bosch Tassimo Happy TAS1002N - Инструкция по эксплуатации - Страница 17

13 en

Problem

Cause

Solution

LED 

R

 (Fill water 

tank) lights up.

There is not enough water in 

the water tank.

Fill the tank with cold, fresh water as far as 

the 

a

 mark. Reinsert the water tank.

LED 

R

 (Fill water 

tank) lights up even 

though there is 

enough water in the 

water tank.

The float in the water tank is 

stuck.

Clean the water tank and free the float.

The water tank is not inserted 

correctly.

Check that the water tank is correctly 

inserted.  

LED 

Q

 (Descale) 

and LED 

R

 (Fill 

water tank) light 

up simultaneously 

and brewing is not 

possible.

There is a fault on the 

machine.

Unplug the mains plug. Please contact the 

 TASSIMO  careline.

LED 

Q

 (Descale) 

and the status 

display flash 

simultaneously

The descaling process is 

running.

Wait until the descaling process is 

complete.

LED 

Q

 (Descale) 

lights up.

The appliance needs to be 

descaled.

Descale the appliance. Please refer here to 

the section 

Descaling

.

LED 

Q

 (Descale) 

lights up even 

though decalcified 

water has been 

used.

Even decalcified water 

contains low amounts of 

calcium carbonate.

Descale the appliance. Please refer here to 

the section 

Descaling

.

LED 

Q

 (Descale) 

flashes.

Appliance must be descaled 

urgently.

Descale the appliance at once. Please refer 

here to the section 

Descaling

. 

All LEDs flashing.

There is a problem with the 

voltage of the power supply.

Unplug the appliance and then plug back in 

again. If the problem persists for a lengthy 

period, have the voltage of your power 

supply checked by an electrician.

Troubleshooting