ILLY Iperespresso Y3.2 Black ( 60281) - Инструкция по эксплуатации - Страница 28

28

7

6

Place a container of at least 0.75 litre capacity 
under the dispensing spout.

Turn on the machine.

4

3

2

1

Turn off the machine.

Remove the tank and empty out the remaining 
water.

Attach the tank containing the descaling solution.

Fill the tank with fresh water up to the maximum 
level and let the descaling solution dissolve.

8

Within 15 seconds from power on, press and hold 
the   button for 3 seconds.  

5

Close the lever, do not enter any capsule.

3 sec.

If the   and   buttons flash alternately, the machine needs to be descaled. Read all instructions carefully before performing the descaling in order to familiarise yourself with the process. 
The cycle lasts about 8 minutes. 
NOTE: The descaling procedure can be started only when the machine is cold. If the operations are not carried out according to the indicated time, the machine will not start the descaling 

process. In this case, turn off the machine and repeat the steps from the beginning.

Limescale normally builds up with the use of the machine. The machine is equipped with an automatic program allowing you to optimise cleaning and to remove limescale deposits 

from the inside. The descaling procedure should be done at least every 2 months. Failure to descale the machine may cause malfunctions not covered by the warranty.
Only use descaling products for coffee machines. Do not use vinegar, lye, salt or formic acid as they may damage the machine. Follow the procedure described below and not the 

instructions on the package of the descaling solution.

EN

7 - DESCALING

17G0210_ILLY_Y3 2_Multilingua_EN-FR-ES-IT-DE-PT-NL-DK-GR-RU-KOR-SA-CHN_C41062I.indd   28

28/04/17   10:07