BRAYER BR1142 - Инструкция по эксплуатации - Страница 8

8

EN

• 

Wipe the outer surface of the unit body (1) with a 

slightly damp cloth and then wipe the unit body (1) 

dry. Use soft detergents to remove dirt; do not use 

metal sponges, abrasive detergents and solvents.

• 

Do not immerse the coffee maker (1), the flask (2) 

and the power cord into water or any other liquids, do 

not wash the unit in the dishwasher.

• 

Do not allow water to get on the contact block of the.

DESCALING

• 

During the use of the unit some stains, scale etc. can 

appear on the heating element, it is not a problem, 

but a result of water quality.

• 

Scale, appearing inside the unit body (1), influences 

the water taste and disturbs the heat exchange 

between water and the heating element. It also 

risks damaging the heating element. Burning of the 

heating element caused by the large amount of scale 

in the flask (2) is not covered by warranty.

• 

To remove scale, you can use special scale-removing 

agents, as well as household ones, for example, 

vinegar or citric acid.

• 

To remove scale, fill the flask (2) with water one-third 

full and boil it. Add vinegar (6-9%) up to the maximal 

mark and leave the liquid in the flask (2) for several 

hours. After the scale dissolves, pour out the liquid 

and rinse the flask (2) several times. To oust the 

smell of vinegar, boil water several times.

• 

Dissolve 25 g of citric acid in 500 ml of hot water. 

temperature of the flask (2); when preparing the next 

coffee portion, the preparation time may be slightly 

shorter since the flask (2) will be warmer.

• 

ATTENTION! 

- Coffee is a drink prone to quick boiling. Do not 

leave the coffee maker unattended during making 

coffee, especially when the coffee starts boiling.

- If the ready drink is splashing out, immediately 

unplug the coffee maker to avoid getting burns. 

- If you don’t use the coffee maker, unplug it.

• 

When the coffee starts rising and boiling, you will 

hear sound signals, the coffee maker will turn off, the 

backlight of the « » button (3) will turn white. 

• 

Remove the power plug from the mains socket.

• 

Note: - after each portion of coffee it is recommended 

to wipe the temperature sensor (4) with a slightly 

damp cloth.

CLEANING AND  MAINTENANCE

• 

Before cleaning unplug the coffee maker, pour out 

water and let the coffee maker cool down.

• 

Grasp the handle (5), slightly lift and remove the flask 

(2) from the coffee maker body (1).

• 

Wash the inner surface of the flask (2) using neutral 

detergents, rinse and dry, do not let the detergent 

come into contact with the flask contact group (2).

• 

Wipe the temperature sensor (4) with a slightly damp 

cloth.