BRAYER BR1142 - Инструкция по эксплуатации - Страница 6

6

EN

• 

Do not repair the unit by yourself. Do not 

disassemble the unit by yourself, if any malfunction 

is detected, and after it was dropped, unplug the unit 

and apply to the service center.

• 

Transport the coffee maker in the original package.

• 

Keep the unit out of reach of children and disabled 

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL 

OR LABORATORY PURPOSES

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low 

temperature, it is necessary to keep it for at least 

three hours at room temperature.

• 

Unpack the coffee maker and remove all the 

packaging materials. 

• 

Keep the original package.

• 

Read the safety measures and operating 

recommendations.

• 

Check the delivery set.

• 

Examine the coffee maker for damages, in case of 

damage do not plug it into the mains.

• 

Make sure that the specifications of power supply 

voltage specified on the lower panel of the unit or 

correspond to the specifications of your mains. When 

the unit is used in the mains with 60 Hz frequency, it 

does not need any additional settings.

• 

Wipe the outer surface of the unit body (1) with a 

clean, slightly damp cloth to remove dust. 

• 

Place the body (1) on a solid steady flat and non-slip 

non-metal surface away from heat sources as far as 

possible from the edge of the surface. 

• 

Do not place and do not use the coffee maker in 

closed space, for example, in the cupboard or in 

closed structures — this can lead to its breakage, 

cause harm to the user or damage to his/her 

property.

• 

Grasp the handle (5), slightly lift and remove the flask 

(2) from the coffee maker body (1).

• 

Wash the inner surface of the flask (2) using neutral 

detergents, rinse and dry, do not let the detergent 

come into contact with the flask contact group (2). 

. Wipe the outer surface of the unit body (1) with a 

slightly damp cloth and then wipe it dry. Do not use 

abrasives or coarse scourers for this.

• 

Before connecting the coffee maker, make sure that 

there are no moisture drops on the unit body (1), the 

power cord and the power plug.

• 

Fill the flask with water up to the maximal level mark.

• 

Set the coffee maker filled with water.

• 

Insert the power plug into the mains socket.

• 

Set the power switch press the « » button (3), you 

will hear a sound signal and the backlight of the «

»  

button (3) will turn red.