Melitta Calibra - Инструкция по эксплуатации - Страница 8

9

between a minimum of 5 g and a maximum of 9 g per 

cup. To do this press and hold the Selectbutton 



. 

In addition to 

, the   symbol also appears in the 

display. By pressing the 

+

 button or the  

–

 button 



, the desired grind quantity per cup 

is set, this is stored when the select button is 

released.

•  If T appears on the display, the tare weight on the 

scale should be set. After pressing the Tare button 



, 

the T disappears and the preset number of cups  

remains on the display (the collection container 

must be correctly positioned on the stainless-steel 

plate).

•  When the   button is pressed 



 the grinding 

process starts. 

•  The current number of cups flashes on the display 

during the grinding process.

•  As soon as the preset number of cups is reached, 

the grinder switches off. The grinding process can 

be stopped at any time by pressing the   button 



.

•  The last number of cups set and the grind quantity 

per cup remain stored even after unplugging from 

the mains power supply.

3.3 Setting to select the coffee  

quantity manually

•  In this setting, the scale is deactivated. The grind 

quantity is determined by switching off manually. 

•  This setting is recommended to fill a portafilter.

•  Press the Select button 



 until the 

 symbol and 

the 

 symbol appear in the display. 

•  When the   button is pressed 



 the grinding 

process starts.

•  When the required grind quantity is reached, press the 

 button 



 again. 

•  During the grinding process, the grind time in seconds 

is shown on the display. The maximum grind time is  

50 seconds.

4. Tips 

• Only fill the bean container with the quantity of coffee 

beans that you intend to use in the near future.

• The required grind quantity depends on the 

coffee quantity and preparation method. Different 

amounts are used for the different preparation 

methods (table 2).

• Instead of the supplied collection container, it is 

also possible to grind directly into a Melitta

®

 coffee 

filter (

1

x4, 

1

x2 and 

1

02) 



. Many currently available 

coffee filters can also be placed directly on the scale. 

• Very dry ambient air and/or electrostatically charged 

plastic filter holders can lead to the ground coffee 

not falling completely into the collection container. 

Ground coffee can fly around in an uncontrolled 

manner and attach itself to the outer wall of the 

machine. Moistening the coffee filter in the filter 

holder beforehand 



 reduces this unavoidable 

effect. 

5. Cleaning and care

ATTENTION:

 Always disconnect the mains plug 

before cleaning 



!

For the best coffee results, we recommend that you 

clean the bean container, grinder and ground coffee 

chute regularly. Clean when the grinder is completely 

empty.

•  The bean container can be removed from the 

machine for cleaning. To do this, press and hold the 

button at the bottom edge of the bean container 



in the open position 



. At the same time, turn the 

bean container anti-clockwise until it stops and remove 

it from the machine. Remove coffee residues from 

the bean container with a soft, damp cloth

•  The outer grinder ring can be removed to clean 

the grinding mechanism. To do this, lift the clamp 

upwards 



 and unlock the grinder ring by turning it 

anticlockwise. Remove the grinder ring 



. 

•  Clean the grinding mechanism with the supplied 

brush 



. Remaining coffee residues can be shaken 

out or removed using a vacuum cleaner.

•  Replace the grinder ring in the appliance and turn it 

clockwise until it locks into place 



. It is completely 

locked when the grinder ring can no longer be 

pulled up and out. 

•  Ground coffee residues on the ground coffee chute 

and on the housing can be removed with the enclosed 

brush and/or a soft, damp cloth  .

•  To insert the bean container, place it on the appliance 

and turn clockwise until it clicks into place. In this 

position, the markings on the housing and on the 

bean container are vertically one above the  

other  . The coffee grinder can only be used if the 

bean container is correctly inserted.

•  The collecting container, stainless steel plate and lid 

of the bean container can be cleaned with a damp 

cloth.

•  Never clean the coffee grinder and its removable 

parts in the dishwasher.

6. Technical  information 

•  The appliance has an overload protection for the 

grinding mechanism, this protects against damage by 

foreign objects. If you hear a loud, rattling, previous-

ly unknown noise during the grinding process, press 

the   button 



 and clean the grinding mechanism 

as described under point 5 “Cleaning and care”.

•  When the appliance is not in use it switches off 

after 5 minutes. The last settings are saved auto-

matically. The appliance can be switched on again by 

pressing any button.

     GB