Кофемашина Melitta Caffeo Solo&Perfect milk E 957-103 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
22
Heating milk
• Switch on the appliance.
• Submerse the Cappuccinatore hose
13
directly into the milk.
• Press the
button.
fl
ashes while
the appliance is heating up. After the
heat-up phase,
is illuminated.
• Turn the control dial (Image
F, 3
) to the
"Warm milk" position (
is pointing up).
• Turn the valve switch
11
clockwise until
the stop.
is
fl
ashing. The milk is
being heated.
• Turn the valve switch
11
counterclockwise until the stop. The
heating is completed.
• Rinse the Cappuccinatore after each
use.
Rinsing the Cappuccinatore
The Cappuccinatore should be cleaned
at regular intervals („Cleaning the
Cappuccinatore“, page 24).
It is recommended to rinse the
Cappuccinatore on a weekly basis with
the milk cleaner system from Melitta
®
. Use
the milk cleaning solution instead of clear
water.
• Switch on the appliance.
• Fill a vessel halfway with clear water.
• Hold a vessel under the Cappuccinatore.
The hose of the Cappuccinatore must be
submersed in the water.
• Turn the control dial (Image
F, 3
) to the
"Milk froth" position (
is pointing up).
• Turn the valve switch
11
clockwise until
the stop. Close the valve switch when a
mixture of clean water and steam comes
out.
• Wait for 30 seconds or press the
button to change to the normal operating
mode.
Dispensing hot water
A maximum of 150 ml of hot water can be
dispensed in each process. To dispense
a larger amount of hot water, repeat the
process.
• Switch on the appliance.
• Turn the control dial (Image
F, 3
) to the
"Hot water" position (
is pointing up).
• Hold a vessel under the Cappuccinatore.
• Turn the valve switch
11
clockwise until
the stop.
is
fl
ashing. Hot water will
fl
ow into the vessel.
• Turn the valve switch
11
counterclockwise until the stop.
Water hardness and
fi
lter
It is important to properly set the water
hardness so that the appliance displays
the need to be descaled in due time. From
the factory, it is set at water hardness 4.
After inserting a Melitta
®
Claris
®
water
fi
lter, it is automatically set at hardness
level 1.
Melitta
®
Claris
®
water
fi
lter
The Melitta
®
Claris
®
water
fi
lter removes
lime and other harmful substances from
the water. The water
fi
lter should be
changed every 2 months, however, at the
latest when
appears on the display.
The water
fi
lter is available in specialised
shops.
Inserting the water
fi
lter
fl
ashes during the entire changing
process.
• Put the water
fi
lter in a glass with
tap water for several minutes before
inserting it in the appliance.
• Switch off the appliance.
BA_Solo_Perfect_Milk_042015.indd 22
BA_Solo_Perfect_Milk_042015.indd 22
20.04.2015 21:17:14
20.04.2015 21:17:14
