Melitta Caffeo Solo & Milk E 953-102 - Инструкция по эксплуатации - Страница 31

Operating Instructions: Melitta

®

 Solo

®

 & Milk

|

1829-0618 | 2018-08

31

Technical data

GB

Troubleshooting

Malfunction

Cause

Measure

The symbols for 
cleaning 

 and stand-

by 

fl

 ash alternately.

The brewing unit is missing or 
not properly inserted.

Insert the brewing unit properly and 
lock.

The brewing chamber is 
over

fi

 lled.

Switch off the appliance and switch 
it on again using the ON/OFF button 

 (repeat if necessary) until standby 

mode is displayed.

Continuous 

fl

 ashing of 

all buttons.

System error

Switch off the appliance and switch it on 
again via the ON/OFF button 

; if this 

does not solve the problem send the 
appliance to the service department.

Technical data

Technical data

Operating voltage

220-240 V, 50/60 Hz

Power consumption

maximum 1400 W

Pump pressure

maximum 15 bar

Dimensions
   Width
   Depth
   Height

200 mm
455 mm
325 mm

Capacity
   Bean container
   Water tank

125 g
1.2 l

Weight (empty)

8.1 kg

Ambient conditions
   Temperature
   Relative humidity

10°C to 32°C
30% to 80% (non-condensing)

You can reset the appliance to the default 
settings.

Prerequisite

: The appliance must be 

ready for operation.

■

To do so, press the on/off button

and 

also press the steam dispensing button 

 for more than 2 seconds. 

→

The appliance has been reset to 
default settings.

Overview of default settings:

Default settings

Brewing temperature

Medium

Water hardness

Very hard

Timer for 
Auto OFF function

30 minutes

Timer for energy-saving 
mode

5 minutes

Reset the appliance to the default settings